Moroso oil pan
http://www.jegs.com/images/photos/71020210.jpg
The pic is the same pan, but the pan it's self has been painted chevy orange. No dents/dings, just has the dip stick on the wrong side (85 and earlier) This pan is for a Chevy II, I'll give dimensions if you need em. $40

The second item is a Syclone stock Air to Water IC, got this from a guy off a wrecked Ty, I'm wanting to say something ~75K on it. Pressure checked the core it's OK, needs new blow off cap. $100

The third item is a set of two bolt ARP main studs, no windage tray provision. NIB, $35 would be nice.

I have a G-body aluminum rear bumper support. This will shave about 20 pounds off the back end of your Monte/Cutlass/Grand Prix/Regal, is a production option besides the steel one. I'd like to see $40 for this piece

Two stock Grand National down pipes (the piece after the elbow) $10 each

All prices are plus shipping, and if you want to negotiate a lower price go ahead and make offers. I'm in need of the following parts (when not stated for SBC)

valve springs Comp 981/"Z-28" springs or similar
ARP head bolts or studs
head gaskets, felpro style for 305
cam/lifters SUM-K1102/3 or similar flat tappet something around 204 or 214 duration and mid .4 lift
header gaskets (copper) SUM-111405
2.25 or 2.5 inch mandrel bends
small cap distributor for TPI F-body
SBC plug wires for above

If you're near me I'm also looking for a "416" casting 305 head, but definitely don't wanna get involved with shipping on that. Shipping from Carbondale, Illinois 62901.

 

TTT. Studs and IC sold; have a set of good condition series 3 3.42 gears for sale as well. These are pulls from my 89 Astro van with about 142K on them; I want $35+shipping for em. I also have a 1350 pinion yoke for a 7.5 inch axle I'd like to see $20 for.