355 longblock,and a 700R4
Thread Starter
Member
Joined: Dec 2003
Posts: 168
Likes: 0
From: metrodetroit
Car: 87gta
Engine: dont know yet
Transmission: 700-r4 race prep
355 longblock,and a 700R4
Insane deal
--------------------------------------------------------------------------------
Ok here is the deal of the century. I am willing now to sacrifice my project!
Short block: https://www.thirdgen.org/forums/en...new-parts.html (SBC 355 new parts inside)
Short block receipts= 1906.91$
700R4: https://www.thirdgen.org/forums/en...converter.html (700-r4/w converter for sale)
Transmission recipts=1278.15$
Trickflow heads: https://www.thirdgen.org/forums/en...ew-mocked.html (Trickflow 23 new, mocked up only)
Heads receipts=1426.34$-(this is including 1.6 Crane gold pro race roller rockers)
This is a total of 5004 dollars. I designed this motor with engine analyzer. This motor with a carb and an air gap intake will do about 420hp@5800 and 430-450@3000 torque. With a tpi setup and a tuned chip about 350-370hp@5000ish and 450-475@2500ish tq, with a converted lt1 or miniram about420hp@5800/420@3500ish tq. I was aiming for the converted lt1. I wanted to make sure that I would have a good match for cam and heads, this is very important. Now I would like to try selling the whole project for 55percent of original cost! so thats 45 percent off!! The asking price is 2750.00 or best offer. The links have pictures. If you need more just ask or call.
James Augustine 1-586-615-6917
All of this stuff has ZERO MILES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Forgot to mention I will throw these in free!-- They are new!
https://www.thirdgen.org/forums/mi...s-68460-a.html (Hedman headers#68460)
Also will throw in a new federal waterpump
Also a new stock balancer!
Also my old tpi setup
https://www.thirdgen.org/forums/mi...take-sale.html (Tpi intake for sale)
Also I have the old fuel rail w/T.P.I.S. afpr
Also the 8 #22 stock injectors
I think I have the old throttle body laying around too. With an airfoil!
Even toss in my old Gta's radiator, torque arm bar, ac condenser, And what ever else I can find for the project that I can find. All stuff above is free when you buy the project! I am willing to drive a hundred miles if someone wanted me to meet them or drop it all off
I am crazy for letting all this go so cheap!
--------------------------------------------------------------------------------
Ok here is the deal of the century. I am willing now to sacrifice my project!
Short block: https://www.thirdgen.org/forums/en...new-parts.html (SBC 355 new parts inside)
Short block receipts= 1906.91$
700R4: https://www.thirdgen.org/forums/en...converter.html (700-r4/w converter for sale)
Transmission recipts=1278.15$
Trickflow heads: https://www.thirdgen.org/forums/en...ew-mocked.html (Trickflow 23 new, mocked up only)
Heads receipts=1426.34$-(this is including 1.6 Crane gold pro race roller rockers)
This is a total of 5004 dollars. I designed this motor with engine analyzer. This motor with a carb and an air gap intake will do about 420hp@5800 and 430-450@3000 torque. With a tpi setup and a tuned chip about 350-370hp@5000ish and 450-475@2500ish tq, with a converted lt1 or miniram about420hp@5800/420@3500ish tq. I was aiming for the converted lt1. I wanted to make sure that I would have a good match for cam and heads, this is very important. Now I would like to try selling the whole project for 55percent of original cost! so thats 45 percent off!! The asking price is 2750.00 or best offer. The links have pictures. If you need more just ask or call.
James Augustine 1-586-615-6917
All of this stuff has ZERO MILES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Forgot to mention I will throw these in free!-- They are new!
https://www.thirdgen.org/forums/mi...s-68460-a.html (Hedman headers#68460)
Also will throw in a new federal waterpump
Also a new stock balancer!
Also my old tpi setup
https://www.thirdgen.org/forums/mi...take-sale.html (Tpi intake for sale)
Also I have the old fuel rail w/T.P.I.S. afpr
Also the 8 #22 stock injectors
I think I have the old throttle body laying around too. With an airfoil!
Even toss in my old Gta's radiator, torque arm bar, ac condenser, And what ever else I can find for the project that I can find. All stuff above is free when you buy the project! I am willing to drive a hundred miles if someone wanted me to meet them or drop it all off
I am crazy for letting all this go so cheap!
Thread Starter
Member
Joined: Dec 2003
Posts: 168
Likes: 0
From: metrodetroit
Car: 87gta
Engine: dont know yet
Transmission: 700-r4 race prep
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
Oct 11, 2015 11:51 PM
[CA] 700R4 trans & parts
6998poncho
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 25, 2015 02:56 PM





