Insane deal

--------------------------------------------------------------------------------

Ok here is the deal of the century. I am willing now to sacrifice my project!

Short block: https://www.thirdgen.org/forums/en...new-parts.html (SBC 355 new parts inside)

Short block receipts= 1906.91$

700R4: https://www.thirdgen.org/forums/en...converter.html (700-r4/w converter for sale)

Transmission recipts=1278.15$

Trickflow heads: https://www.thirdgen.org/forums/en...ew-mocked.html (Trickflow 23 new, mocked up only)

Heads receipts=1426.34$-(this is including 1.6 Crane gold pro race roller rockers)

This is a total of 5004 dollars. I designed this motor with engine analyzer. This motor with a carb and an air gap intake will do about 420hp@5800 and 430-450@3000 torque. With a tpi setup and a tuned chip about 350-370hp@5000ish and 450-475@2500ish tq, with a converted lt1 or miniram about420hp@5800/420@3500ish tq. I was aiming for the converted lt1. I wanted to make sure that I would have a good match for cam and heads, this is very important. Now I would like to try selling the whole project for 55percent of original cost! so thats 45 percent off!! The asking price is 2750.00 or best offer. The links have pictures. If you need more just ask or call.

James Augustine 1-586-615-6917
All of this stuff has ZERO MILES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

I can't get the links to work in here so, Go to the mid-west regional board. Once your there look for the "Insane Deal" post, posted by me Juggernaut_69 .
Sorry for the crappy add. Thanks later!

 

bump

 

bump

 

Links don't work. Pictures please jeff@rummell.net

 

bump

 

bump

 

bump

 

bump

 

pm sent

 

Can you tell me more about the 700-r4/w converter for sale? What all was done to the trans, and what is the stall on the convertor, and is it a lock up or?

Thanks, Ed.

 

pix of heads dont work