Gauging Interest: Weld Rodlites for 3rdgen with M/T ET Street Radials.
Thread Starter
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Gauging Interest: Weld Rodlites for 3rdgen with M/T ET Street Radials.
alright guys, i'm thinking of selling my Rodlites. i need money for the new combo, i think it's finally time to say goodbye to the 305... here's the low down on what you get:
-2 15x6 3.5" backspacing
-2 15x10 5.5" backspacing
-2 205/70/15 Michellin Harmony all season front tires. (more than half tread depth)
-2 275/60/15 M/T ET Street Radial rear tires (these will need to be replaced after another 20 passes or so, depending on your application)
-20 12mmx1.5 McGard triple chrome plated shank style lug nuts. they are open and have very nice plastic caps that keep dirt out of the lugs. lifetime warranty agains chipping, even if using an impact wrench!
-4 Weld center caps.
-4 screw in chrome plated valve stems
these wheels/tires where on the car when i went 12.31@108mph on a 1.67 60' time with my 305. the M/T's have also been on my car when i had the 350 in and went 1.64 to the 60' with more tuning i hadn't gotten into yet.
i have over $1000 in wheels/tires/lugs/valve stems, i'd like $700 or best offer. you can ask anyone, these wheels are in tip top shape and have NO curb-rash whatsoever.
here's a few pics of them on my 1990 RS/SC Camaro:



i'm a little hesitant to ship because of size but will at buyers expense.
i'm located in Warner Robins, GA and i WILL NOT SEPERATE!
considering trades for 350+cubic inch shortblocks or aftermarket cylinder heads (dart, afr, trickflow, etc. no junk.)
-2 15x6 3.5" backspacing
-2 15x10 5.5" backspacing
-2 205/70/15 Michellin Harmony all season front tires. (more than half tread depth)
-2 275/60/15 M/T ET Street Radial rear tires (these will need to be replaced after another 20 passes or so, depending on your application)
-20 12mmx1.5 McGard triple chrome plated shank style lug nuts. they are open and have very nice plastic caps that keep dirt out of the lugs. lifetime warranty agains chipping, even if using an impact wrench!
-4 Weld center caps.
-4 screw in chrome plated valve stems
these wheels/tires where on the car when i went 12.31@108mph on a 1.67 60' time with my 305. the M/T's have also been on my car when i had the 350 in and went 1.64 to the 60' with more tuning i hadn't gotten into yet.
i have over $1000 in wheels/tires/lugs/valve stems, i'd like $700 or best offer. you can ask anyone, these wheels are in tip top shape and have NO curb-rash whatsoever.
here's a few pics of them on my 1990 RS/SC Camaro:



i'm a little hesitant to ship because of size but will at buyers expense.
i'm located in Warner Robins, GA and i WILL NOT SEPERATE!
considering trades for 350+cubic inch shortblocks or aftermarket cylinder heads (dart, afr, trickflow, etc. no junk.)
Member
Joined: Oct 2004
Posts: 237
Likes: 0
From: buffalo
Car: 85 camaro
Engine: 327
Transmission: 350, 6200 stall, w/ brake
Axle/Gears: soon to be strange 5.14
interested, but........if you cant sell them locally after a while, then we'l talkbump for a great, honost seller
Last edited by bitchin85camaro; Jan 22, 2007 at 03:55 PM.
Thread Starter
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
doesn't seem to be much interest for these...i may just keep them. pm me with serious offers, otherwise, they're staying with me.
Member
iTrader: (1)
Joined: Mar 2004
Posts: 158
Likes: 0
From: conway new hampshire
Car: 86 z28
Engine: 355 TPI W/305 HEADS
Transmission: 700r4
Axle/Gears: 3/73's
nice..........
dude i love your car. it looks mean with no gfx on it and those wheels set it off......... great job..
and by the way bump for ya..
and by the way bump for ya..
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM






