Rebuilt 1.94"/1.50" heads #462624 - $250

Edelbrock Performer Series carb #1406 - $125

Holley Street Dominator single plane intake - $75

New starter (DL3510MS) - $50

Flowtech shortie headers (3 bolt flange) - SOLD

Edelbrock Y-pipe (2.5" inlets, 3" slipon outlet)(brand new) - SOLD

Edelbrock tall aluminum finned valve covers - SOLD

Edelbrock Performer RPM intake - SOLD

Edelbrock Performer Series carb #1406 (needs rebuilt) - SOLD

ACCEL Distributor w/extra Accel cap and rotor and Accel SuperCoil - SOLD

100amp Summit alternator w/march serpentine pulley (SUM-811001) - SOLD

March serpentine underdrive crank pulley - SOLD

Mallory Fuel Pressure regulator #4309 - SOLD

Summit Billet Aluminum Alternator Bracket (SUM-420100) - SOLD

Pictures

More pictures, thats the carb that needs rebuilt

More pictures

This is the good carb and Performer RPM intake

will those headers bolt up to the y-pipe?

If you havent sold the headers yet I would like to put my name in for them, give me a shipping quote to 23061 and if you have paypal will send the money as soon as I get a reply.

thanks
Chilli

NO, the y-pipe requires modification to use it. It explains that in the description on SUMMITRACING.COM and I didn't realize it.

I haven't done any cleaning to the heads since I removed them, but they seriously don't have any more than a cam breakin and maybe 10 miles on them!

I got some paint on the pulley from when I painted my fuel pump blockoff plate, and I have no clue what the numbers etched in it are, they must be some date code from the March factory or something.

Ritter, just wanted to make sure you got the payment for the headers sent it last night.

thanks
chilli

chilli, pm sent

Can you post a pic of the Y-pipe or provide a part number?

Thanks

The large piece there is the only piece I have, when you order just the y-pipe from summitracing.com that is all it comes with!

EDL-25-9509

http://store.summitracing.com/partde...065+4294856041

This is the summitracing.com link to the y-pipe, the "image is a representation of this part. Actual part may vary"

Yeah I didn't see that part on the page about the image not being the actual part when I ordered it, but it is for a small block V8 from 86-90

ttt

Re: purchase of the March pulley- I'll take it. Just to confirm: it should fit my 88 IROC 5.7 serpentine system, correct? Also, are you doing Paypal??? To bad the alternator stuff sold, but is the starter 'new' or 'new-rebuilt'??
Thanks, Nitro

neagan, pm sent

bump

Sent you a pm

still got some stuff left

Needs to go!

How much to overnight the starter to 31216?

InfernalVortex, I sent you a pm the other day, haven't heard anything back yet, let me know.

Everything is still available here!!!

Are the distributor and the fuel pressure regulator still available? Does the advertized price include shipping? Thanks

Dave B

D BERRY, pm sent

in the pics the one in need of a rebuild looks cleaner than the other one? what is the story on the carbs, miles, running condition? does either of them come with the braided line and gauge?

The one that needs rebuild was put on a multi-port fuel injection car with no regulator and ran for a week (thanks to an old friend) it is fairly new, only about 2 years old or so and has been on 3 defferent vehicles.

The good carb was run on a couple engines for break-in and then ran 12.4 with nitrous in an '81 Malibu for a day. One full 10lbs bottle of nitrous was used through it and it still runs strong!

That isn't a braided line there by the way, it is one of those sleeves, the guage and sleeved line will go with the first carb that is sold.

do u have pics of the holly intake?

I can't seem to find any pictures of it, I'll get some tomorrow

Only 4 items remaining

The HOLLEY intake

what sould shipping be to 53950?
thanks

steve o, pm sent

TTT