I have a Complete 1978 305cu Long Block which was rebuilt once about 60,000 miles on it. It has a Edelbrock RPM cam in it with 84 305cu pocket ported (exhaust side and intake) heads with new stamped steel rockers about 2 months old. I replaced the engine because it started to smoke at high rpm's and I wanted to have a new engine that I could boost with no worries. It includes everything pictured except the TPI lower intake.
Still ran good when removed. Great engine. All it needs is new rings , the heads were done 4 months ago when i swapped in the RPM cam. Had a great powerband with TPI naturally aspirated and impressive with boost. Very nice choppy idle. Valve springs are good to .600 lift
I need this out of here. No room. Pick up only in Miami FL. $50.00