I have for sale an Edelbrock intake manifold, ported SLP runners, ported plenum, 24# injectors, and fuel rail.
The runners have been siamesed in the intake part, and the plenum has been ported big enough for a 58mm TB and siamesed on the runners side.

Edelbrock base $275 SOLD

SLP runners $250 (siamessed on the plenum side 3" in)

SVO 24# injectors $100 (blue top) 280 150 947

Fuel rail with adjustable fuel pressure regulator $60

Ported plenum $70 (siamessed on the runner side)

These came off my 1988 IROC Z

Will have more pictures in a few days.

Prices are plus shipping.

Here's a pic of the system when I installed it, but here, it was not ported yet. I will post actual pictures in a few days.

I forgot to say I'm in the 90501 area

Still available.This is the picture of the plenum after being opened up and cleaned for the 58 mm TB.

I also have some gaskets (need to be modified), bolts, fuel lines, and cold start injector I can give for free to the lucky buyer of the whole deal together.

TTT. Willing to deal if you buy the whole setup.

$450 shipped on the runners, base and plenum, LMK to 60004

---

no thanks then but my offer stands until weds

Interested in the base
-What is the model # -I have a 90' corvette

I can look tomorrow for the number. What I'm sure of is that it will fit the early, as well as the late model type of thirgen heads (the ones with the four middle bolts at a different angle)

The Edelbrock base will work with all tpi setups since the 4 center bolt holes are already elongated so that it'll fit either bolt angles. They also have the external, Corvette style EGR port located on the back passenger side intake runner, as well as the f-body port in the center. You use a block off plate for whichever port you don't use.

I found the part number, 3860 is cast underneath the manifold.

Summitracing sells it as: EDL-3860 for $395
http://store.summitracing.com/partde...5&autoview=sku

Here's a couple of pics.

TTT

Waiting for a possible local sale on the edelbrock base

Still for sale

$250 shipped on the Edelbrock Base LMK

PM sent

Base Stiil available???

Edelbrock intake (base) is still available, as well as the SLP runners, plenum, injectors and fuel rail with AFPR.

are you selling the wiring harness seperetly? i need an 88 wiring harness...

How much for the whole setup?I am interested

interested in injectors... have $ or are you willing to trade for anything? im parting a 90 iroc. let me know

do you have a part # on the base?

thanks

No harness, sorry.

Steve Mack: PM sent

92purplehaze: PM sent

Onemanarmy: Yes, the part number is 3860.
Summitracing sells it as part #: EDL-3860
Click here for summitracing price and specs

Will sell to the first person confirming that they want any part to be fair to everyone.
Gabe

Any idea if the plenum will work on a '90 Corvette? If so, I am interested.

If I'm not mistaken, on f-bodies, the 89-92 plenum base and runners,are a bit different than the 85-88, I'm not sure about corvettes.

Still available

TTT

Edelbrock base $275

SVO 24# injectors $100 (blue top) 280 150 947

Fuel rail with adjustable fuel pressure regulator $60

Ported plenum $70 (siamessed on the runner side)

These came off my 1988 383 IROC Z

Prices are plus shipping.

TTT

Will you go $40 shipped on the fuel rail with APR to 41005?

Well I know you turned done a few of my offers but i can offer you $235 shipped on the Base right now

Can't go that low.
----------
Sorry, I'm already waiting for payment for the edelbrock base.

Picture of ported plenum

Edelbrock base is sold. Everything else is still available.

Everything available, minus the base. (Thanks to 3 pedals fot the smooth transaction)

TTT

is there any way i could get the intake bolts from you? mainly the ones that ahold the runners on... Espesially (sp) the long ones?

Let me see if I have a extra set. Do you need a set for the SLP runners or for the stock ones? I'm not sure if they are the same.
If you still need a water neck, I have one for sale too.
Let me know.

got the neck, had to order from hong kong!! im in need of the stockers, im short 2 bolts on my rebuild

I only have the SLP ones. Sorry.

damn.... o well.,,

take payments?

It depends. PM sent

TTT

24# injectors are sold

I'll give you $300 for the runners and plenum shipped to me

does the fuel rail have the cold start injector opening in the back on the drivers side of it?

Price on everything that is left combined and shipped to 15241?

Yes it does.
----------
PM sent
----------
PM sent

I'm not going to be able to buy them. sorry. My Grand Am crapped out last night and now i have to dump the extra cash into somthing more serious and a whole lot less fun the power