driver seat is toast.needs recoveringsomething bad.i do have a foglamp switch that has the yellow lettering.i'm not sure what shape the trunk release switch is in.it may not be good.it does work,but i don't remember if it stays in place.i'll check it later this evening and let you know.20 for the foglamp switch shipped.

 

pic added for foglamp switch

 

its tough to tell from the pic, is it yellow? as long as it is i'll take it. do you have the plasic trim that goes around it as well? let me know, and i'll take it!!! thanks!

 

if i can get it off the car i will let you get it also.oh yeah,it is yellow.i tried to take a good pic without the flash but thelighting was bad.

 

switch sold.

 

What rear is in the car? Gears? Disc/Drum? Also, what condition is the front bumper cover? If you would be willing to ship, how much for each to 90638 (southern cali)?

Thanks,

-Tim-

 

pic of the head liner and do you have winndow switches. and is the head liner ABS?

 

rear end is drum brake.it has 3.73 gears and the torsen carrier from a 98 z/28.the carrier originally had 2.73 gears.the front bumper cover has a small tear.it would be best to buy a new one.the rear has new bearings and seals and one new axle.it did have 2 but the other one broke shortly after installing it .the axle is a superior evolution .i bought the axles as a set with bearings and seals.i'm sure shipping would be pretty pricy.but i want 350 for the rear end assembly.




as for pics of the headliner.i don't have any.it is still installed in the car and it is abs.i bought it from year one with sunvisors.i installed this over the summer.yesi do have the window switches,but the lettering is worn.i will take them out and get pics this weekend if the weather holds out.

 

here are some pics of the headers......if you are trying to LOWBALLme keep your opinionsto yourself.they have no street miles on them.they have surface rust due to my car sitting for long periods of time on my trailer.










.

 

the scratches are from installation and the dents are from clearance issues with the k member

 

bumpity bump

 

If you want to ditch the headers cheap let me know not trying to low ball you but getting them recoated isn't gonna be cheap either. Thanks

 

having them recaoted shouldn't be that bad compared to buying a new set of headers.i'm not the ony one to have this problem with the hooker super comp 2210's




pm me with a decent offer