I still have a pair of SBC 305 swril port H.O. heads with 10,000 miles $75.00
I have a stock oil pan that fits new style 1 peice seal SBC V8 motors. $10.00
I also have a crane cam with a lift around 500 with lifters hydrolic cam. still have cam lube on cam. ran the cam in and deceided to go with a different cam. $50.00
I also have a set of 8 stock pistons and rods from a 1988 350 with 50,000 miles $10.00
I also have a edlerbrock performer intake used. for SBC V8 alum. intake painted black $30.00
I also have a chrome air cleaner cover from summit racing for NEW $10.00
all parts need shipping added e-mail me with your address for pricing
call matt 240-298-6705

 

How much would shipping on the oil pan to NY 11580

 

$23.00 shipped to your address

 

Any Pictures of the pan.

 

Was going to ask about the pan, but not worth it to ship it, especially how cheap they are at the JY.

Price and Pic of the intake to: Bradley23150@yahoo.com

Zip= 33635

 

Do you have camera phone. i can send them that way just need a number. or i will have to get my wife to get some up loaded to the computer so i can send them e-mail.

 

Ill try to get a pic and price tonight after my second job be about 10:00 tonight

 

Any idea what the casting numbers on the heads are.I am looking for some smaller chambers than what I have on my 350.

 

#14102187 There are rebuilt with 10000 miles the book says they are 64cc heads but being redone im sure 5 to 10 thousands have been milled for a true surface

 

The places I looked claimed they are 58cc which is great,but they are early vortec heads which won't work good with stuff I already have.Intake valves are a little small 1.84 I believe.

 

Can I get a Part #, Or link as well? Thanks.

 

sorry guys i didnt get the pic's last night, got home late. did get time to clean these parts up from sitting 1 year. The oil pan is painted orange it does have a few spots were the paint chipped but it has no rust in it anywhere. 1 little dent on very bottom. The intake is still painted blue and orange. I will clean it all up and paint it black before shipped. Like i said i got home late got some quick pictures and hit the bed. let me know if you want more pic's

 

got the pics.

Got a part # for the Intake? It looks kinda rough, and needs sandblasting.

Full price to 33635?

Thx.

 

shipping will be $20.00 it will be $50.00 shipped to your place. Its not that bad i can clean it up and paint it. if you want it sand blasted you will have to do it your self and paint it what every you want. Ill try to get a part # tonight.

 

Part # on the intake is EDL-2101 you can see it at www.summitracing.com they sell new for $127.95 plus shipping

 

bump

 

I'm guessing the cam is flat tappet and not a roller?

 

it is flat tappet the lift is .470 I ran this cam and wanted alittle more agression. so i went with .510 cam is just broke in still have cam lube on the shaft. cranecam #36887