LS1 5.7 block + lots of other LS1 parts
Thread Starter
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
LS1 5.7 block + lots of other LS1 parts
Have a 2001 LS1 block with about 30k miles on it. The rotating assembly has been removed and I no longer have it. The cylinders don't have any damage, and still have a crosshatch. Located in Reno, NV. It doesn't weigh that much so it could probably be shipped by truck fairly inexpensively.
I also have a set of 241 heads (the higher flowing LS1 heads), rockers, valve covers, valley cover, front and rear covers, oil pump, balancer, LS1 intake, fuel rails, injectors, stock cam, lifters, pushrods, double roller timing chain, coil packs, etc.
Make an offer on all or part. I'll make someone a good deal on all my LS1 stuff. PM if interested. Thanks guys.
I also have a set of 241 heads (the higher flowing LS1 heads), rockers, valve covers, valley cover, front and rear covers, oil pump, balancer, LS1 intake, fuel rails, injectors, stock cam, lifters, pushrods, double roller timing chain, coil packs, etc.
Make an offer on all or part. I'll make someone a good deal on all my LS1 stuff. PM if interested. Thanks guys.
Joined: Jul 2003
Posts: 582
Likes: 205
From: DFW
Car: 90 Formula 350
Engine: 350
Transmission: 700r4
Axle/Gears: Dana 44 3.54
Re: LS1 5.7 block + lots of other LS1 parts
the 243's are better as were LS6, LS2 and some truck motors stock
the 241 is a good budget head
payment sent on block and small parts
Thanks J!
Thread
Thread Starter
Forum
Replies
Last Post
