Thinking about selling my superchager & cogs

Thread Tools
 
Search this Thread
 
Old Mar 12, 2009 | 07:46 PM
  #1  
87tpi7749's Avatar
Thread Starter
TGO Supporter
 
Joined: Feb 2004
Posts: 326
Likes: 0
From: Colchester, CT
Car: 1987 Iroc, 1987 MCSS TPI
Engine: 5.7L
Transmission: 700R4 in both
Thinking about selling my superchager & cogs

Money is tight and car is parked right now. Just putting this out there to see if there is any interest. I have a freshly gone through Vortech V2 SQ S-trim charger. I bought new. Ran for 5000 miles. Sent back to Vortech for a quick go through. I had ASP build me a set of cog pullies, the serps can slip. I don't use a BOV or fuel pressure modifier, I run a FAST XFI with this. The kit is for a TPI Chevy. I have it still on car. If there is any real interest I may just sell it. It is polished. I have a couple diff pullies. I am running 12psi right now. I also have Aquamist 2d set up that may go too. Of course the FAST XFI could go if the price is right. I have two intercoolers also. I also have a modded 749 ecm to run some low Z 65pph injectors which are available and fresh from the fuel shop.
Reply
Old Mar 12, 2009 | 08:39 PM
  #2  
FSTFBDY's Avatar
Supreme Member
iTrader: (33)
 
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Re: Thinking about selling my superchager & cogs

Sounds like a nice setup! You really should list a price you. Might get more interest.
Also Post pictures.
Reply
Old Mar 14, 2009 | 04:10 PM
  #3  
87tpi7749's Avatar
Thread Starter
TGO Supporter
 
Joined: Feb 2004
Posts: 326
Likes: 0
From: Colchester, CT
Car: 1987 Iroc, 1987 MCSS TPI
Engine: 5.7L
Transmission: 700R4 in both
Re: Thinking about selling my superchager & cogs

Well here's what I will be selling. Vortech charger with stock serp drive. ASP cog drive with one very good belt and one new belt. Cog drive is 15% underdrive on serp side. Aquamist 2d water/meth injection. It comes with everything needed. All wiring pressure switches, a gauge, some tools to set the arming switch, a booster pump, extra jets, extra tubing. Intercooler, several pieces of tubing, rubber elbows, straits, BOV Greddy type with tubing adapter, original Vortech to TPI polished air inlet. 1227749 ecm with modded injector drivers. Low Z 65pph injectors, fresh no miles. DIY WB02 with hardly used NTK sensor. Vortech upgraded stainless braided oil hose. Just a whole bunch of stuff. Don't feel like using ebay. Let me know if anyone has interest. I'll start by saying supercharger with serp drive $2500.00. Air intake piping and cooler 300.00. Cog drive with extras 600.00 Aquamist with extras $600.00. The rest, ask.
Attached Thumbnails Thinking about selling my superchager & cogs-dcp00952.jpg   Thinking about selling my superchager & cogs-dcp00956.jpg   Thinking about selling my superchager & cogs-dcp00958.jpg  
Reply
Old Mar 14, 2009 | 04:13 PM
  #4  
87tpi7749's Avatar
Thread Starter
TGO Supporter
 
Joined: Feb 2004
Posts: 326
Likes: 0
From: Colchester, CT
Car: 1987 Iroc, 1987 MCSS TPI
Engine: 5.7L
Transmission: 700R4 in both
Re: Thinking about selling my superchager & cogs

A couple more pics.
Attached Thumbnails Thinking about selling my superchager & cogs-dcp00962.jpg   Thinking about selling my superchager & cogs-dcp00959.jpg   Thinking about selling my superchager & cogs-dcp00960.jpg  
Reply
Old Mar 14, 2009 | 04:16 PM
  #5  
87tpi7749's Avatar
Thread Starter
TGO Supporter
 
Joined: Feb 2004
Posts: 326
Likes: 0
From: Colchester, CT
Car: 1987 Iroc, 1987 MCSS TPI
Engine: 5.7L
Transmission: 700R4 in both
Re: Thinking about selling my superchager & cogs

A couple more pics. Oh yea and a 3 bar map sensor, never used. The two cog pullies make 10 psi and 12 psi, the stock serp makes 6-7psi. The cog drive was used with an ATI Superdamper, which I stongly recommend. Ask any Q's as I was breif in my descr.
Reply
Old May 10, 2009 | 12:23 PM
  #6  
jeff91z28/l98's Avatar
Junior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 16
Likes: 0
From: Clinton, NY
Car: 1991 Z28
Engine: 383 Stroker/TPiS MiniRam/D1SC
Transmission: Probuilt-700R4
Axle/Gears: 3.23
Re: Thinking about selling my superchager & cogs

Are you selling the fast xfi system?
Reply
Old May 10, 2009 | 07:46 PM
  #7  
87tpi7749's Avatar
Thread Starter
TGO Supporter
 
Joined: Feb 2004
Posts: 326
Likes: 0
From: Colchester, CT
Car: 1987 Iroc, 1987 MCSS TPI
Engine: 5.7L
Transmission: 700R4 in both
Re: Thinking about selling my superchager & cogs

Everything is gone. No interest here on TGO, sold it all on ebay.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
Jan 19, 2024 04:55 PM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
92firebirdchris
Exterior Parts for Sale
0
Aug 14, 2015 11:56 AM
Firechicken86
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 12, 2015 10:07 PM
mcgarnicle
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 12, 2015 04:58 PM




All times are GMT -5. The time now is 12:45 PM.