I have an 86 305, just pulled it, it has freshly rebuilt 416 casting heads with about 3500 miles on them, might still have the receipt. It has a Crane 262/272 420/442 flat tappet cam and lifter kit with less then 3000 on them, have receipt and cam card. New double roller timing chain that I installed with cam. I have 19lb injectors that I just bought used but are in good condition and never gave me any problems. If you want you can take the long block, the bottom end needs rings, not rebuild. I will also part it out. If I do so this is how I would like it...

I would like $80 obo shipped for the cam&lifters.

$220 obo for the heads, prefferably pick up but we can talk shipping.

$80 obo for the short block with stock 86 cam, pick up only.

$50 obo shipped for the injectors, good o-rings.

If you want the long block, shoot me an offer, I would like around $350.

Dont be afraid to shoot me any reasonable offer, I need everything gone.

 

The one on the right is the style.

 

PM sent.

 

UPDATE: Cam/Lifters/Timing Chain are sold.

Heads are off the motor and I'm still open to offers.

Still have the injectors and short block.

I also have a set of stock 1.5 rockers for pre 87 heads which I will sell for $10 shipped.

 

Bump

$200 for the heads, almost brand new

$40 shipped on the injectors

Still $80 obo on the block.

Still $10 shipped on the rockers.

 

pm sent

 

ttt

The heads are almost new, good for someone looking to cheaply re-build there 305 or have them cut for bigger valves and run them on your 350.