Looking for a Healthy roller cam
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Looking for a Healthy roller cam
Found a cam , now I need retro-hydraulic roller lifters for an early block Hey , I need a retro-fit Hydraulic roller cam & lifters for a 400 SB ,
I want one in the 230 - 240 @ 050 range with mid to upper .5's lift .
What do you have on the shelf ??
I want one in the 230 - 240 @ 050 range with mid to upper .5's lift .
What do you have on the shelf ??
Last edited by C409; Jul 3, 2009 at 02:28 PM.
Senior Member
iTrader: (5)
Joined: Feb 2005
Posts: 838
Likes: 0
From: GA
Car: '90 C1500
Engine: SBC MPFI
Transmission: 4L80e
Axle/Gears: 4.30
Re: Looking for a Healthy roller cam
Well...its not a retro but I have a 234/242 with mid .5's lift on a 111 lsa for 150 plus shipping if you're interested.
Junior Member
iTrader: (2)
Joined: Sep 2006
Posts: 1
Likes: 0
From: Burbs of Chicago
Car: Blown Injected Skylark
Engine: 350 Chevy
Transmission: 4L80E
Axle/Gears: 12 Bolt 3.73
Re: Looking for a Healthy roller cam
I have a Comp Cams retrofit hydraulic roller. 230 Int, 236 Exh @0.05 0.373 lift = 0.598 lift with 1.6 rockers at the valve. 112 lsa. It has about 3500 miles on it. I went turbo and went to a smaller cam. $140 and free shipping.
Thread
Thread Starter
Forum
Replies
Last Post