For sale: 406 SBC. This is a great street motor with less than 500 miles of use. I am going with a big block for this car, so I won't have any immediate use for this motor. Runs great, no smoke, cranks 180psi. Specs as follows:

-3951509 GM 400ci block with 0.030" overbore
-Flat top pistons, approx. 10:1 compression ratio
-World Products Sportsman II heads, 200cc intake runners, 72cc chambers, 0.560" lift springs
-Lunati 1.6 aluminum roller rockers
-Comp Cams 12-213-3 Hydraulic flat tappet cam. 0.534"/0.534" lift with 1.6 rockers, 292/292 advertised duration, 244/244 duration @ 0.050" lift. 110 degree LSA
-Edelbrock Performer RPM manifold
-Holley 3310 750cfm vacuum secondary carb
-Edelbrock Elite tall valve covers
-HEI distributor with Accel Super Coil

As seen in the pictures, motor looks excellent. Has extremely low miles and runs excellent from my experience. Recently pulled from running and driveable car. Motor started and warmed every month to keep oil on all parts. Large pictures available. $1600. E-mail: scholz.matthew@gmail.com Phone: (740) 317-5486

 

Where are you located?
Additional info on crank, rods, rings used.
Thx,
Jp

 

Engine has been sold.