[NH] Patriot Performance LT1 Heads
Thread Starter
Senior Member
iTrader: (5)
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Patriot Performance LT1 Heads
I have a set of fully assembled, never installed Patriot Performance LT1 Aluminum Cylinder Heads.
The p/n is 2047
Specs are as follows directly from their website:
Patriot Performance is proud to announce their new aluminum190cc LT1 head. We have designed these heads to work well on 350-383 LT applications. The heads were designed to use a stock LT1 intake. Heads come assembled with our famous Patriot Gold .650” hydraulic roller springs, titanium retainers, 2.02”/1.60” stainless valves. bronze guides, viton rubber seals, 3/8” studs, and guide plates.
Sold As Pair
Technical Specs:
Combustion Chamber: 58cc
Intake Runner: 195cc
Exhaust Runner: 70cc
Intake Valve: 2.02"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.150"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
I will only accept credit card or certified funds for this item. The PayPal fees are to high for me to accept anything through PayPal.
New they are $995/set
My price is $750 shipped in the lower 48.
Contact me with questions.
The p/n is 2047
Specs are as follows directly from their website:
Patriot Performance is proud to announce their new aluminum190cc LT1 head. We have designed these heads to work well on 350-383 LT applications. The heads were designed to use a stock LT1 intake. Heads come assembled with our famous Patriot Gold .650” hydraulic roller springs, titanium retainers, 2.02”/1.60” stainless valves. bronze guides, viton rubber seals, 3/8” studs, and guide plates.
Sold As Pair
Technical Specs:
Combustion Chamber: 58cc
Intake Runner: 195cc
Exhaust Runner: 70cc
Intake Valve: 2.02"
Exhaust Valve: 1.60"
Max. Valve Spring Lift: 0.650"
Spring Pressure Closed: 135 lbs. @ 1.800"
Spring Pressure Open: 375 lbs. @ 1.150"
Retainer Material: Titanium
Valve Seal Material: Viton
Valve Guide Material: Manganese Bronze
Valve Job: 5-angle
I will only accept credit card or certified funds for this item. The PayPal fees are to high for me to accept anything through PayPal.
New they are $995/set
My price is $750 shipped in the lower 48.
Contact me with questions.
Thread
Thread Starter
Forum
Replies
Last Post
PATRIOTIC1911
Northern Great Plains and Rocky Mountain
5
Oct 7, 2022 10:38 PM
