Is the complete TPI unit still available? I didnt get a response. I'm very interested if it is-but I need to know fast. I have 2 other possible sellers who are waiting to hear back from me.
is this from a 305 or a 350?

 

yes i have the fuel pump. yes i still have it. i have one setup off 5.0 and one off 5.7. yes 89 had no cold start injector and had the maf.

 

whats your zip code?

 

zip is 23229.
Im not far away from you, so if you can get me a complete tpi conversion with fuel pump shipped for 350 I'll take it. assuming the runners are in good shape.

 

the 350 setup that is. 305 tpi wont have the injectors to support my setup

 

I am looking for a T5 transmission bellhousing that will work with a 350 engine. Give me a call at (412) 607-5758. Thanks

 

ok. i have the whole intake setup with 5.7 injectors. the engine wiring harness and computer. the maf sensor. distributor and throttle cable. i will take some pics and post them in a few hours. if you check back around 6. i can do $350. even though your in va. it should be about $100 to ship. its about 85# between both boxes.

 

you're a good man.
please confirm, is that 350 shipped?
also, does that include the other sensors as well or just the MAF?
if you happen to have a TPI fuel sending unit and a few inches of the harness to the sending unit i'd be more than happy to purchase that off of you as well.
Pending some pics, some simple answers and trading some paypal information, I'd say we will both be very happy by the end of today.

 

here are some pics. i have some other sensors and the fuel pump-sending unit and a little wire from the plug also. i have all the bolts to put tpi together also. $350 shipped. i got held up --thats why i'm so late. sorry.

 

more pics.

 

Memcal from an 87 350, 700R4, MAF, dual fans? 88 may be the same I'm told. Just can't have VATS. Possibly the number is ABWN 8656

 

I like it!
how much for the remaining sensors and the sending unit?
feel free to call me at 804-873-4643 if you'd like. im about to go in for a night shift. ill be up lol.

 

I am talking to just 1 other person about their unit-damn work.... may need to wait till tomorrow to get some final info from them before committing to the purchase

 

everything is included that i have for the $350.

 

well sir, you have made me an offer I cannot refuse. It looks like I may be buying both your system and the one from this other guy, assuming he gets back to me and doesnt dish it off to someone else. I want parts from both. I'll then resell 1 of the systems. If you PM me your paypal information I will send you payment as soon as I get home (about 2 hours from now) along with my shipping address. thank you!

 

waiting for PM. ill be going to sleep soon-email alert may wake me up. but i'll send you payment as soon as i see the info

 

I am interested in a couple of the intake manifolds you have in your pics. if you could send me some pics of them it would be greatly appreciated. My e-mail is todd_e_williams_h_p@live.com . Thankyou Forgot to add my zip and ask for prices. Zip is 49075 thankyou

 

Would you happen to have a: engine and accessory harness from an 87 iroc, '165 ecu to match, and a 700r4 shifter cable?

all shipped to 21157 Thanks!

 

You have a complete sending unit for a 91 TPI

 

i need harness and possibly comp.
heres my problem
ive got an 88 iroc with an engine out of a 91.
its a 350 tpi.
but alot of the wires do not match.
do you have anything that will work for me?

 

do you have the wire harness for a 88 tpi ? mine is a 5.7 if that matters, would like to c one with no cut wires

 

i need a tpi harness and computer for an 88 iroc 305 w/od V0N 2P0 B.C.

 

looking for a throttle cable bracket, the tpi badge on top of throttle body, dist cover, maf with ducts-would prefer the long, one piece rubber one.

 

i have the tpi plate for top of throttle body--i have the dist cover and the maf with straight duct. whats your zip? i'll get pics tomorrow

 

do you have a rear end with 3.42 gears and disc brakes?

 

87 MAF 43011

 

do you have a good mass airflow sensor for 89 5.7 ta thanks john fajdad@aol.com

 

$60 shipped

 

do you have paypal if no email your adress and i will send you a moneyorder. ill take it fajdad@aol.com

 

doncar_336@comcast.net
is my paypal

 

may be in the market for a fuel pump sending unit. and local, so no shipping. price? (pump optional). thanks!

 

40 with pump
978-273-9742 if interested

don

 

Looking for a TPI ECM for 86-89 350. I think a 305 computer will work then I will just swap proms.

 

i have a 87 tpi computer with no prom. $60 shipped in the u.s.

 

do u have another 7165 ecm for sale without the prom? how much shipped to 38829?

 

I might take a plenum and set of runners for my 87 if you have a set. maybe the manifold also if the price is right
Pricing shipped to 92029?

Thanks,
Mike

 

the plenum and a set of runners for $80 shipped
manifold for $60 shipped
$125 for all 4 pcs. shipped

 

yep. same price $60 shipped

 

hello guy, need a tpi engine harness, (maf) 85-89, area code 20722. hope you can help me out. thanks

 

got one out of a 87 ...$110 shipped

 

looking for a torque converter cover for a 92 700R4 firebird.
Do you have one? with bolts as well.

 

I need a mass air flow sensor for a 1987 Trans Am GTA.

Have one for sale ??

Email me and let me know.

Thanks

 

Hi, I am looking for a 7165 ecm, do you have one still?
Thanks Vince

 

You don't have an 85 PROM do ya'? FTM or HLL broadcast code. Code is on a sticker covering the UV erase segment right on the RPOM

 

do you have a mass air flow sensor for an 87 iroc 350?

 

$60 shipped

 

You happen to have a t-5 bellhousing?

 

woundering if you had an aluminum distributor cover and set of screws? shipped to 36277

 

do you have an 89 auto wiring harness?

 

Are the EGR valves on the 350 the same as the 305