[KS] 2.8/3.1L V6 parts
Thread Starter
Joined: Jul 1999
Posts: 20,310
Likes: 1,068
From: Salina, KS
2.8/3.1L V6 parts
I've got a mechanical fuel pump off my 84 Camaro. The one on it was leaking, so I ordered this one from the local parts store. 3 days and $45 later I had a new fuel pump. It was only on the car a short time before I blew the 2.8. As can be seen in the pic, it's still virtually new, it's just been on my shelf for 3 years. I'm thinking $35 shipped.

I've also got a 2.8 fuel rail. There's no fuel pressure regulator, it's a left over from when I was making the stock regulators adjustable. All the threads look clean to me, and it's never been apart. It'll clean up ok, it's just a bit dirty from sitting in the bottom of a box. I'm thinking it's probably off a Fiero or a FWD 2.8. It's identical to a 2.8/3.1 Camaro/Firebird fuel rail except the cold start injector port is in a different spot. Plug the CSI port, or use it for a fuel pressure gauge or a fuel source for a nitrous setup. I'll do the same deal on that one, $35 shipped.


Finally, I've got a set of 12 point Fiero plenum bolts. They're chrome, in nice original condition. I'd like to get $25 shipped out of them.

I've also got a 2.8 fuel rail. There's no fuel pressure regulator, it's a left over from when I was making the stock regulators adjustable. All the threads look clean to me, and it's never been apart. It'll clean up ok, it's just a bit dirty from sitting in the bottom of a box. I'm thinking it's probably off a Fiero or a FWD 2.8. It's identical to a 2.8/3.1 Camaro/Firebird fuel rail except the cold start injector port is in a different spot. Plug the CSI port, or use it for a fuel pressure gauge or a fuel source for a nitrous setup. I'll do the same deal on that one, $35 shipped.


Finally, I've got a set of 12 point Fiero plenum bolts. They're chrome, in nice original condition. I'd like to get $25 shipped out of them.









