[NJ] AFR heads with a ton of work in them $1250
AFR heads with a ton of work in them $1250
Selling my Air Flow Research heads with extensive amount of portwork.
Heads started out as 195 competition heads with 2.055/1.60 valves fully cnc'd, then were hand ported with a ton of hours into them, heads are also straight plugs and d-port exhaust ports. Runner volume is somewhere in the 220cc range and chambers are around 60cc, they are setup for fel-pro intake gasket 1209, I can verify runner volumes and chamber cc's when removed.
I currently have them on my 406ci motor in my car, which runs perfect, going with a new combo for the car. Heads are also setup for solid roller cam. Car runs a 10.3's @ 131mph w/ 1.49 60' on motor with pumpgas stock weight 3700lbs.
looking to get $1250 for them.
Not the best picture of the runners, but you can see how tall the runners are.
email: KrazedZ@yahoo.com
Heads started out as 195 competition heads with 2.055/1.60 valves fully cnc'd, then were hand ported with a ton of hours into them, heads are also straight plugs and d-port exhaust ports. Runner volume is somewhere in the 220cc range and chambers are around 60cc, they are setup for fel-pro intake gasket 1209, I can verify runner volumes and chamber cc's when removed.
I currently have them on my 406ci motor in my car, which runs perfect, going with a new combo for the car. Heads are also setup for solid roller cam. Car runs a 10.3's @ 131mph w/ 1.49 60' on motor with pumpgas stock weight 3700lbs.
looking to get $1250 for them.
Not the best picture of the runners, but you can see how tall the runners are.
email: KrazedZ@yahoo.com
Re: AFR heads with a ton of work in them $1250
Last edited by KrazedZ; Mar 21, 2016 at 12:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM
