Gauging some interest to see if I should sell

I have a full set of 1.65 harland sharp roller rockers 3/8's stud nice shape with low miles

Trick Flow Kenny Duttweiler 195 runner 23 degree heads with CNC'd chambers and ported to a 1205 gasket. Need a valve job and 1 valve (not very costly, was quoted from my head man 300) to make them perfect once again. comp 986 springs these are nice heads that make some good power for a smaller runner.

Scat 9000 383 crank still in good useable shape never been turned or had a bearing failure on it.

GM X rods with ARP 2000 bolts connected to Speed pro forged pistons 2 valve reliefs for 383 stokers. 6 pistons are good 2 need to be replaced due to skirt shrinkage.

Hedman long tube 1 5/8's headers. Were ceramic coated long ago but has seen FAR better days but are not all bent up just need to be sanded and repainted.

many other things as well but these are just a few

Make offers.

 

TTT for sale