did some front suspension changes and now i have some parts i no longer need.. check back in as this parts list will be updated as i am going through my parts to see what all i have. i also will be listing some other parts that are non front suspension related as well. will get pictures of items if you are interested


Stock Front struts - about 20k miles - 50.00 (pair)

Stock Front Springs - cut so it sits about 3/4 inch lower - 40.00 (pair)

Stock caster camber plates - 25.00 (pair)

Stock K member & a arms - painted black in nice shape (will not be available until my new ones are made, should be withing the month) 100.00

stock 3rd gen throttle cable, transmission cable, and speedometer cable - 20.00 for all

stock 3rd gen spare tire Jack - 20.00

stock 3rd gen windshield washer reservoir - 15.00

stock 3rd gen coolant reservoir - 15.00

Steering box for power steering with lines - 25.00 (will prob have to be picked up as its very heavy)

stock 305 upper radiator hose and flexible lower hose - 10.00

stock 1989 camaro guage cluster with 7707.8 miles on it - 20.00

GM 5.3 intake gaskets. - 25.00

GM 5.3 water pump - 50.00

Dual Trans cooler set up to go in front of 3rd gen Radiator - SOLD

Brand new Stock 305 TBI fuel pump - SOLD

SBC mini starter - brand unknown - SOLD

9 inch ford iron center section- 50.00

Stock GM LS1 belt tensioner - 50.00

LS1 thermostat - 160 degree - 10.00
- 180 degree - 10.00

 

pics of camber plates(my current ones are shot id like a cheap replacement until I can afford the founders stuff)
Also are the balljoints and bushings stock in the a-arms and how old are the balljoints if their stock? Would you sell just the a-arms? Pics of those too please

 

will go grab pictures of the plates this afternoon.

not sure on the age of the ball joints. but i would prefer to sell them with the k member.. however i may separate if i have no interest in the k member. however it will be a little while before those are off the car. the car goes to the chassis shop in the next couple weeks for the new k member and a arms to be made

 

caster camber plate pic

 

I want em but only with the a-arms if the ball joints are good let me know how long before you remove em

 

ball joints are still good.. im not sure when they will be off tho as i am still waiting to hear when to bring the car to the shop. so it may be a month or more yet

 

Pics of the transs cooler

 

 

Whats the condition of tv cable? Just asking becaise some ive come across clicking mechanisim is worn

 

was working when it came out.

i havent used it in a couple years but i know when i had my old carbed motor in the car it worked just fine.

 

BUMP

 

still got some stuff