[LA] crower cam E33015e very low miles
Thread Starter
Member
iTrader: (4)
Joined: Apr 2004
Posts: 318
Likes: 0
From: New Orleans
Car: CAMARO
Engine: 383 LT1
Transmission: T 56
Axle/Gears: 3.73
crower cam E33015e very low miles
Crower cam E33015e The cam was in the engine that has very little run time on it but zero miles.*
Part Number/Work Order Number E33015Engine Application 350 CHEVROLET
Grind Number SPECIALADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 293º Lift: .549
Clearance Hot: .018EXHAUST: Duration: 301º
Lift: .570 Clearance Hot: .020The specifications listed above are based on a rocker arm ratio of*1.50 IN1.50 EXLOBE SEPERATION 112ºDuration at .050" Intake: 260ºExhaust: 268º4 degrees of advance have been ground into this Camshaft.
I would like to get 125 shipped*
Part Number/Work Order Number E33015Engine Application 350 CHEVROLET
Grind Number SPECIALADVERTISED CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 293º Lift: .549
Clearance Hot: .018EXHAUST: Duration: 301º
Lift: .570 Clearance Hot: .020The specifications listed above are based on a rocker arm ratio of*1.50 IN1.50 EXLOBE SEPERATION 112ºDuration at .050" Intake: 260ºExhaust: 268º4 degrees of advance have been ground into this Camshaft.
I would like to get 125 shipped*
Thread
Thread Starter
Forum
Replies
Last Post
GVMV
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 08:01 PM