articwhiteZ
Supreme Member
close
Have a brand new set of MT ET Streets 28/12.5/15 never been on a rim
$300 you pick up the shipping or pick them up your self.
also have a set of weld wheels(drag lites) 15/8 (4.5 back space) with a set of ET Streets on them same size 28/12.5/15. wheels have wheel screws in them and tubes.
tires need to be replaced..(see above add).
$200
this set was for my car 92 Z28. and ran Perfect for years. just going to new wheels/tires and dont need the drag lites. any more.
the other 4 fronts and backs have sold.
pay pal is fine add 4% fees.
if you buy the set. $450 will ship free to lower 48
below shot is the ET Streets on my Z28. just bolt on and go!
$300 you pick up the shipping or pick them up your self.
also have a set of weld wheels(drag lites) 15/8 (4.5 back space) with a set of ET Streets on them same size 28/12.5/15. wheels have wheel screws in them and tubes.
tires need to be replaced..(see above add).
$200
this set was for my car 92 Z28. and ran Perfect for years. just going to new wheels/tires and dont need the drag lites. any more.
the other 4 fronts and backs have sold.
pay pal is fine add 4% fees.
if you buy the set. $450 will ship free to lower 48
below shot is the ET Streets on my Z28. just bolt on and go!
articwhiteZ
Supreme Member
close
btt
articwhiteZ
Supreme Member
close
bump
do these fit on stock wheel wells exactly what im looking for
articwhiteZ
Supreme Member
close
yes... on my 92 Z28 bolt on and go!
just in case my car info
stock rear disk brakes. stock springs stock LCA.
bolt on!
note..wheels are not chrome plated! but polished.better then they come from weld wheels..its up to buyer to keep them this clean..lol

new from weld RTS...note polish..they will look better when im done..lol

bolted on

looks good any time
all tucked under...

this is how she was back in the 90s.. just rolled out of the closet..dusted off..after sitting for 8+ years
now with 2 times the HP!
she will be back!....if I don't go broke upgrading stuff!
wash me!

just in case my car info
stock rear disk brakes. stock springs stock LCA.
bolt on!
note..wheels are not chrome plated! but polished.better then they come from weld wheels..its up to buyer to keep them this clean..lol

new from weld RTS...note polish..they will look better when im done..lol

bolted on

looks good any time
all tucked under...

this is how she was back in the 90s.. just rolled out of the closet..dusted off..after sitting for 8+ years
now with 2 times the HP!
she will be back!....if I don't go broke upgrading stuff!
wash me!

articwhiteZ
Supreme Member
close
articwhiteZ
Supreme Member
close
Member
Hey Jeff I just saw these pics.With That new motor your going to be putting in your going to be doing some serious wheel stands when you put the pedal to the metal.
articwhiteZ
Supreme Member
close
Quote:
ya back in the 90s she did that.launchn hard. but only 12" to 18" high. was going to move the fuel set up before it dragged..had to keep the 60 foots down under 1.50s still just a foot brake car. with power windows.Originally Posted by Steve Mack
Hey Jeff I just saw these pics.With That new motor your going to be putting in your going to be doing some serious wheel stands when you put the pedal to the metal. top end was always soft with the 700R4 gearing.. but now with the 6 pinon planet and some other goodies. that's all been fixed!
it should be fun

those new wheels look great!
articwhiteZ
Supreme Member
close
Quote:
thanks.Originally Posted by SiCkRs
those new wheels look great! had summit send out 3 other makes of wheels. all the top names.
so I could look close at them.
this was the best ones out there at this time for under $300 a wheel.
center line was to hvy. billet specl was to bulky/blocky and so on..
ya want a wheel that's light. will buff out easy when needed. and will stand up to a beating..wheels have got to always look new!
even 18 years down the road

articwhiteZ
Supreme Member
close
Quote:
had summit send out 3 other makes of wheels. all the top names.
so I could look close at them.
this was the best ones out there at this time for under $300 a wheel.
center line was to hvy. billet specl was to bulky/blocky and so on..
ya want a wheel that's light. will buff out easy when needed. and will stand up to a beating..wheels have got to always look new!
even 18 years down the road
Originally Posted by articwhiteZ
thanks.had summit send out 3 other makes of wheels. all the top names.
so I could look close at them.
this was the best ones out there at this time for under $300 a wheel.
center line was to hvy. billet specl was to bulky/blocky and so on..
ya want a wheel that's light. will buff out easy when needed. and will stand up to a beating..wheels have got to always look new!
even 18 years down the road
I'm only available to post replies on the weekends with updates and replies.
flex plates and damper and nitrous kit with full bottle are on the way. (its tough to ship a full bottle) the lowest price shipped for the draglites and slicks is already posted above, sorry guys can't give em away...
Member
Hi Jeff I didn't see this post.I look forward to getting the parts so I can finish my 400 small block.Thanks Steve
articwhiteZ
Supreme Member
close
btt
pm sent is it 200shipped for the wheels?










