[KY] *SOLD* LIKE NEW 062 Vortec Heads w/ upgraded springs, rpm manifold, valve covers
#1
Member
Thread Starter
Join Date: Aug 2008
Location: Central Wyoming
Posts: 460
Likes: 0
Received 1 Like
on
1 Post
Car: '84 Z28/'82 Z28/'02 C5Z
Engine: 350 cam, boltons/350/cam boltons
Transmission: 700r4/700r4/M6
Axle/Gears: 3.73/3.43/3.43
*SOLD* LIKE NEW 062 Vortec Heads w/ upgraded springs, rpm manifold, valve covers
SOLD
I'm selling preferably all together.
I have a pair of JEGS 062 Vortec Heads that have less than 100 miles on them. Worth around $700 new. In perfect condition. Had them cleaned and inspected at a machine shop, picture of my receipt included saying just that. Phone number of the machine shop included if you would like to call him.
Heads have upgraded LS1 Beehive springs good to .550 lift, here is an attached article from hot rod explaining exactly what was done.
http://www.hotrod.com/how-to/engine/...pring-upgrade/
Also had Comp Cams Magnum Roller Rockers installed.
http://www.jegs.com/i/COMP-Cams/249/...rentProductId=
Here is a link to the springs:
http://www.jegs.com/i/COMP-Cams/249/...CPwaAtkD8P8HAQ
Along with the heads I have an Edelbrock Rpm Performer intake manifold that fits the heads (regular SBC won't fit as I'm sure most of you are aware) gaskets included. They are used but barely. I'll throw them in.
http://www.jegs.com/i/Edelbrock/350/...rentProductId=
Vortec heads take center bolt valve covers soooo.. I have a pair of polished aluminum Proform valve covers, real pretty. Gaskets included. Here a link.
http://www.jegs.com/i/Proform/778/14...oductId=752402
I'll throw in a COMPLETE stock distributor (no pic, it's nothing special and I have it sitting around), I also have some Comp Cam checking springs I'll throw in for free too.
Over $1400 worth of quality parts, add a cam to this and you'll have a good set up. I'm asking $800 +shipping OBO. If you pick them up I'll drop it to $775 cause it'll save me the hassle of shipping them.
I'm selling because I blew the old motor (rod out the oil pan) in my truck, I slapped a completely stock 350 in her and sold her. This stuff is just sitting around unused.
Pics. I can text/email/post more pictures to serious buyers if you want, just PM and I'll shoot you my number. I take PayPal or cash, I'm easy to work with and not in any rush.
I'm selling preferably all together.
I have a pair of JEGS 062 Vortec Heads that have less than 100 miles on them. Worth around $700 new. In perfect condition. Had them cleaned and inspected at a machine shop, picture of my receipt included saying just that. Phone number of the machine shop included if you would like to call him.
Heads have upgraded LS1 Beehive springs good to .550 lift, here is an attached article from hot rod explaining exactly what was done.
http://www.hotrod.com/how-to/engine/...pring-upgrade/
Also had Comp Cams Magnum Roller Rockers installed.
http://www.jegs.com/i/COMP-Cams/249/...rentProductId=
Here is a link to the springs:
http://www.jegs.com/i/COMP-Cams/249/...CPwaAtkD8P8HAQ
Along with the heads I have an Edelbrock Rpm Performer intake manifold that fits the heads (regular SBC won't fit as I'm sure most of you are aware) gaskets included. They are used but barely. I'll throw them in.
http://www.jegs.com/i/Edelbrock/350/...rentProductId=
Vortec heads take center bolt valve covers soooo.. I have a pair of polished aluminum Proform valve covers, real pretty. Gaskets included. Here a link.
http://www.jegs.com/i/Proform/778/14...oductId=752402
I'll throw in a COMPLETE stock distributor (no pic, it's nothing special and I have it sitting around), I also have some Comp Cam checking springs I'll throw in for free too.
Over $1400 worth of quality parts, add a cam to this and you'll have a good set up. I'm asking $800 +shipping OBO. If you pick them up I'll drop it to $775 cause it'll save me the hassle of shipping them.
I'm selling because I blew the old motor (rod out the oil pan) in my truck, I slapped a completely stock 350 in her and sold her. This stuff is just sitting around unused.
Pics. I can text/email/post more pictures to serious buyers if you want, just PM and I'll shoot you my number. I take PayPal or cash, I'm easy to work with and not in any rush.
Last edited by 10secondhopeful; 02-19-2015 at 12:17 PM. Reason: SOLD
#2
Member
iTrader: (5)
Join Date: Aug 2006
Location: Stafford, Connecticut
Posts: 311
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: LIKE NEW 062 Vortec Heads w/ upgraded springs, rpm manifold, valve covers
That's a nice package to wake up a 350 small block.
#4
Member
Thread Starter
Join Date: Aug 2008
Location: Central Wyoming
Posts: 460
Likes: 0
Received 1 Like
on
1 Post
Car: '84 Z28/'82 Z28/'02 C5Z
Engine: 350 cam, boltons/350/cam boltons
Transmission: 700r4/700r4/M6
Axle/Gears: 3.73/3.43/3.43
Re: LIKE NEW 062 Vortec Heads w/ upgraded springs, rpm manifold, valve covers
SOLD. Thanks everyone for the interest.
C.
C.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM