Selling a comp cams 262 cam and lifters with less than a 1000 miles. In great shape. Lifters are still in order with the lobes they came from. $100 plus shipping.

Pair of Edelbrock E Street aluminum heads 185cc 63cc just back from machine shop because a end of a ring broke and marked up the head, they took .010 off and checked all the valves, $600 plus shipping

Edelbrock RPM intake $80 plus shipping

https://m.summitracing.com/parts/cca...FcWCswodHnYIEQ

 

flat tappet Im assuming?
How deep do you think those gouges go if I bit Id want to mill them all off
Thanks
91354 zip

 

Yes it's a flat tappet cam.
My engine shop milled .010 off. If I had to guess another .010 will get them all out. But the machine shop said that they are good as is won't effect anything. But I can understand if you want a clean slate.

 

could have them welded, and then deck the head again. They'd be gone

 

Yes that's true. But I already bought afr heads. You can run those edelbrock heads with no problems the way they are.

 

lowered the price. make offer, willing to make a deal on a complete package $700 plus shipping.