[AZ] Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
Thread Starter
Member
Joined: Jul 1999
Posts: 130
Likes: 1
From: United States of America
Car: Firebird
Engine: LG4
Transmission: Auto
Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
For sale--some used C4HD 13" brake conversion parts:
*Pair of 1LE hubs originally purchased from Ed Miller (aka flynbye)
*Pair of adapter brackets originally purchased from Ed Miller (aka flynbye)
*Pair of caliper carriers
*LH & RH calipers
*Mounting bolts
You get everything pictured. Requires the basic spindle mods, plus you will need to supply your own:
stock brake hoses, banjo bolts, caliper pin and c-clip (ACDELCO 18K281X), pads and rotors. Probably could uses some new bearings too (set 3 and set 6).
$200 plus $20 shipping. I accept Paypal. Thanks.
*Pair of 1LE hubs originally purchased from Ed Miller (aka flynbye)
*Pair of adapter brackets originally purchased from Ed Miller (aka flynbye)
*Pair of caliper carriers
*LH & RH calipers
*Mounting bolts
You get everything pictured. Requires the basic spindle mods, plus you will need to supply your own:
stock brake hoses, banjo bolts, caliper pin and c-clip (ACDELCO 18K281X), pads and rotors. Probably could uses some new bearings too (set 3 and set 6).
$200 plus $20 shipping. I accept Paypal. Thanks.
Joined: Nov 1999
Posts: 1,790
Likes: 22
From: Monroe,NC
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
Re: Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
What shape/condition are the calipers in: as in do they need a rebuild?
Thread Starter
Member
Joined: Jul 1999
Posts: 130
Likes: 1
From: United States of America
Car: Firebird
Engine: LG4
Transmission: Auto
Re: Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
The calipers were rebuilt Raybestos units I got in 2012. They worked fine before the car was put up on blocks in the garage about a year ago. I just removed from the vehicle last week, so they were not sitting outside in the elements. I have added a few more pictures. I would think they would work fine without a rebuild.
Thread Starter
Member
Joined: Jul 1999
Posts: 130
Likes: 1
From: United States of America
Car: Firebird
Engine: LG4
Transmission: Auto
Senior Member
iTrader: (4)
Joined: Jun 2014
Posts: 667
Likes: 16
From: Brainerd, MN
Car: '84 Trans Am
Engine: 357 SBC
Transmission: 700R4
Axle/Gears: 10 Bolt 3.73, Torsen Diff
Re: Corvette 13" C4HD brake conversion parts-adaptors, hubs, calipers
In line, just in case. 
Thread
Thread Starter
Forum
Replies
Last Post
Rellim88
Engine/Drivetrain/Suspension Parts for Sale
28
Nov 10, 2018 03:13 PM
TVP122
Engine/Drivetrain/Suspension Parts for Sale
2
Apr 30, 2014 11:31 PM
tonythetoad
Engine/Drivetrain/Suspension Parts for Sale
9
Apr 30, 2013 06:53 AM
FASTERTHANUMARK
Engine/Drivetrain/Suspension Parts for Sale
8
Apr 6, 2008 07:26 AM