Need an hydraulic clutch Assy. Complete. Prefer new. For 1989 RS camaro.

 

I have included pictures of a master/slave cylinder assembly. This came off of my '89 RS Conv Camaro. Approx 30K miles on the unit. Ended up with an auto with the LT1 install. Either way... I did find after blowing out my second slave cylinder. There is an adjustment boss on the side of the T-5 bell housing. If that boss backs out then the clutch fork does not have a leverage arm and the clutch pedal gets quite stiff. Finally the slave cylinder fails. I do have many parts for a 89 RS 305TBI with T-5 Tranny and 3:18 LS drum brake.

One picture shows the plastic clip is missing one leg. Maybe your original clip is ok. If not this did not cause a problem when I had it installed.

I am looking for $60 obo plus shipping for the master/slave assembly.

Thank You,
Gus
preffered email frank_baker_IV@verizon.net

 

I am very interested. Your preferred email is coming up invalid? Reach me at (speedracer08@rcn.com)