i need a torque arm adapter for an 82 z28

 

I have an adapter from a th350>I also have a new extended drive shaft if interested as well as the th350.Get back ASAP Either at this site or Jmack@commspeed.net

 

i had to shorten the drive shaft it had a th200 w/ a 4" tail where the torqe arm bracket connected directly to the tail ive swapped out to a th350 with like an 11" tail shaft so the adapter needs to bolt on to the 4 bolts that hold the tail shaft on, im assuming is that what you got? if so im interested! i just did an engine swap 305 to a 350 and the adapter and exaust is all i need to get this bad boy rollin. i got a edelbrock performer intake and a edelbrock 650 carb if your intrested my email is dmp7777777@hotmail.com

 

I will take pics and send them to you some time today.I made a mistake about the driveshaft,it was shortened not made longer.

 

good deal cuz they cut my drive shaft too short in my opinion send pic of the adapter. do you live in illinois by any chance? heres a pic of the intake and carb if you r intrested in some kinda swap

 

where did you go zboyjim?

 

I'm sorry about the delay.I'm having trouble loading the the pics of the adapter.I will send them as soon as I can.The driveshaft measurse 44 and 3/4 inches from the center of each yoke.The tail shaft on this TH350 is a six inch.I don't know if the adapter will be the same.

 

I live in Az.I don't have a need for the carb setup.I'm running tpi.Happy with it.

 

thats what i gotta have whats next?

 

Do you need just the adapter or do you need the driveshaft,tailpiece,tranny etc.I'll check what the shipping is going to cost you via ground unless you want to pay for air.Prices???????tourque arm adapter was $88.40 from Summit,how about $50.00 driveshaft$100.00(was $150.00 to get cut,new tube),tranny $50.00

Get back
Zboyjim

 

ok! lets do the torque arm adapter asap, i know im gonna need the driveshaft cuz im so sure the good people at advance cut it too short and its probably my fault .... i got a new tranny so i dont need that. do you have like all kinda parts , like performance suspension etc.?my address is,well my email is dmp7777777@hotmail.com and ill give you my mailing address when you email me. i live in normal,illinoisvia ground will be fine