Hey,

I am located in Lubbock, Texas and hoping to find someone close to allow for pickup.

I am looking for basically an entire IROC 350 Tune Port setup. Need everything for a swap as I am taking out the old 3.1 V6 in mine.

Let me know what you got and how much. Anybody with LT1's and such feel free to let me know on those as well.

Also willing to take LT1 or LS1 for the right price.

Thanks,
Mike

 

Still Looking.

Mike

 

^^^

 

hi, i have a 700r4 with 63k miles on it and i do have all the TPI stuff off of my 305, which if im correct is idential to the 350 stuff. let me know if you still need. im located in NY.

 

Still looking

Mike

 

Nobody?

Would even be interested in an LT1 as well.

Mike

 

Ok here is the deal of the century. I am willing now to sacrifice my project!

Short block: https://www.thirdgen.org/forums/en...new-parts.html (SBC 355 new parts inside)

Short block receipts= 1906.91$

700R4: https://www.thirdgen.org/forums/en...converter.html (700-r4/w converter for sale)

Transmission recipts=1278.15$

Trickflow heads: https://www.thirdgen.org/forums/en...ew-mocked.html (Trickflow 23 new, mocked up only)

Heads receipts=1426.34$-(this is including 1.6 Crane gold pro race roller rockers)

This is a total of 5004 dollars. I designed this motor with engine analyzer. This motor with a carb and an air gap intake will do about 420hp@5800 and 430-450@3000 torque. With a tpi setup and a tuned chip about 350-370hp@5000ish and 450-475@2500ish tq, with a converted lt1 or miniram about420hp@5800/420@3500ish tq. I was aiming for the converted lt1. I wanted to make sure that I would have a good match for cam and heads, this is very important. Now I would like to try selling the whole project for 55percent of original cost! so thats 45 percent off!! The asking price is 2750.00 or best offer. The links have pictures. If you need more just ask or call.

James Augustine 1-586-615-6917
All of this stuff has ZERO MILES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!