[OH] WTT T5 Setup for Auto Setup
Thread Starter
Member
iTrader: (1)
Joined: Oct 2001
Posts: 100
Likes: 0
From: Marshallville, Ohio, USA
Car: 98 Camaro/85 Camaro
Engine: 3.8L/ 355 CI
Transmission: Auto/ TH350
Axle/Gears: 3.23 Posi
WTT T5 Setup for Auto Setup
Looking to trade a complete working T5 setup that is currently in the car for a complete and working Auto trans set-up. Currently the t5 is in an 85 Z28 and the auto trade would need to fit the same car. Planning on turning the street car into a strip/street car and do not feel like pushing the T5.
Car has only been started and moved around the driveway the last few years after a rebuild. Would estimate the clutch disc has approximately 10 miles on it maximum.
Everything would be included (pedals, console, trans, shifter, driveshaft, flywheel, pressure plate and clutch disc)
Everything from the auto would be needed ^^
Prefer something stronger than a stock auto trans. built up 700r4 or TH400. Also would like a higher than stock stall converter.
Let me know if anyone is interested...
Car has only been started and moved around the driveway the last few years after a rebuild. Would estimate the clutch disc has approximately 10 miles on it maximum.
Everything would be included (pedals, console, trans, shifter, driveshaft, flywheel, pressure plate and clutch disc)
Everything from the auto would be needed ^^
Prefer something stronger than a stock auto trans. built up 700r4 or TH400. Also would like a higher than stock stall converter.
Let me know if anyone is interested...




