to fit 91 350 tpi, air preferred,but will take any headers

 

i have a set that is rusty. no name brand. send me your email and ill send pics. It has a homemade y pipe. they WILL fit a 350 or 305. asking 100.00 plus shipping. from florida

 

I have a set of Edelbrocks shorties with y pipe made for AIR with dual cats. I put pipe ends on the air tubes cause I did CAT Deletes, but they could be removed easily enough with some WD-40 and some channel locks. There pretty rusty but will take $150 + shipping. I'll have to use a hacksaw to cut the OEM pipe off them. I gave $400+ for them back around 2000. They use a donut style gaskets that you should be able to get from Autozone or similiar place it matches a GM Truck size. I think they use to be around $5-$10 each.

 

hacksaw to cut what? not the ypipe I hope.LOL

 

Y pipes get weld'd to the OEM pipes, I'd cut through the OEM pipes acouple inches from the Edelbrock pipes and mail them that way. It'd be up the buyer to spending the time with a grinder knocking the welds off to get the old pipes pulled out or trying to butt weld them together.

Sorry, there's no way I can do $110 Shipped for these. If you were closer I would just sell them outright to you for pickup but shipping for these would be fairly high.

 

I've got your headers. Brand new Edelbrock T.E.S. Shortie Headers with Y-pipe. Headers are Ceramic Coated and flawless, y-pipe is in new condition but only factory painted black, not ceramic coated. Might even have the installation kit, but I'd have to search for it.

Also have MSD 8mm spark plug wires, a wire loom kit, and brand new header bolts. Probably have a set of Mr. Gasket Ultra Seal gaskets too.

I purchased all the above to install on my '88 Formula, but never had the time. Looking for $350 for headers, $75 for wires / looms / header bolts. Would package everything for $400. Let me know what you think. I'm about an hour from DE. Pics available upon request.

 

i got a pair of brand new edelbrock TES w/air 68722 never used ceramic coated that i got for my 90 trans am, i'm working on putting a turbo on this month and am using the stock manifold but running out of money,, let them go for $275 solid! let me know, i can send pics