[SC] WTB: TPI fuel lines for 88 GTA
03-20-2011, 08:01 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
WTB: TPI fuel lines for 88 GTA
I am looking for the fuel lines that go from the ruber lines on the drivers fender well to the intake for my 88 GTA. If anyone has these please let me know how much with shipping to 29477 sc.. thanks!
03-21-2011, 10:34 AM
#2
Member
iTrader: (4)
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z, 95 Z-28
Engine: 357, 350 LT1
Transmission: Built 700-R4, 6-Speed
Axle/Gears: 2.73 Peg Leg, 3.42 Posi
Re: WTB: TPI fuel lines for 88 GTA
If you are referring to the fuel rail I have a couple. I also have the rubber lines that run from the fuel rail to the hard lines on the drivers frame rail.
Lmk
Josh
Lmk
Josh
03-21-2011, 10:43 AM
#3
Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTB: TPI fuel lines for 88 GTA
I need the metal lines that run from the fuel rail to the soft lines on the fender well. I assume they are metal but I am not real sure. I found a pic of these on ebay and figured they looked like this. Its a 87 motor going in a 88 if it matters. It in fact they are rubber then how much are you asking for yours. I dont know what they are supposed to look like as I bought my car with no drivetrain. I can take pics of my car if it would help.
Last edited by spudz; 03-21-2011 at 10:47 AM.
03-21-2011, 11:09 AM
#4
Member
iTrader: (4)
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC-Z, 95 Z-28
Engine: 357, 350 LT1
Transmission: Built 700-R4, 6-Speed
Axle/Gears: 2.73 Peg Leg, 3.42 Posi
Re: WTB: TPI fuel lines for 88 GTA
I have a set. Will take a look in the shop to verify and get back to you.
Josh
Josh
04-23-2011, 11:05 AM
#5
Senior Member
iTrader: (10)
Join Date: Jan 2009
Location: Edmonton, Alberta.
Posts: 718
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: WTB: TPI fuel lines for 88 GTA
I have a set from an 88', have the metal lines and rubber lines, both are very very clean with new orings, metal lines are polished with a nice clear coat on them.
Shoot me a pm if interested.
Shoot me a pm if interested.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
03-05-2017 06:37 PM
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
