WTB rear suspension trailing arms AFTER-MARKET PREFERRED
WTB rear suspension trailing arms AFTER-MARKET PREFERRED
I need a set of trailing arms ( bars that hold rear axle to frame rails ) If that is their correct name.
I have heard third gen and 4th gen are the same so thought I would post here.
I basically have a twisted drivers side one on my 97 camaro and it is tearing up my metal in my wheel well so need these asap.
If you have a set of after-market or stock ones please let me know with a shipping quote to 92399 residential. I don't have paypal but can overnight a M/O
If they are stock arm all bushings MUST BE NICE CONDITION ... If after market prefer black ones with black bushings.
Also anyone have a idea why my arm did this? could this be a sign of something more serious or just someone jacked it wrong? Basically in the middle it is twisted and bowed out on both sides.
I have heard third gen and 4th gen are the same so thought I would post here.
I basically have a twisted drivers side one on my 97 camaro and it is tearing up my metal in my wheel well so need these asap.
If you have a set of after-market or stock ones please let me know with a shipping quote to 92399 residential. I don't have paypal but can overnight a M/O
If they are stock arm all bushings MUST BE NICE CONDITION ... If after market prefer black ones with black bushings.
Also anyone have a idea why my arm did this? could this be a sign of something more serious or just someone jacked it wrong? Basically in the middle it is twisted and bowed out on both sides.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: WTB rear suspension trailing arms AFTER-MARKET PREFERRED
lower control arms is what most call them
Some doofus probably put a jack under the arms
Some doofus probably put a jack under the arms
Senior Member
iTrader: (5)
Joined: May 2005
Posts: 831
Likes: 1
From: Midwest IL
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: WTB rear suspension trailing arms AFTER-MARKET PREFERRED
If your still looking I have a set of boxed stock control arms with solid aluminum bushings. Will let them go for 30 plus shipping.
Thread
Thread Starter
Forum
Replies
Last Post
TA8487
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 12:21 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM