RH Knuckle Part # 14021196
Thread Starter
Member
Joined: Jun 2005
Posts: 133
Likes: 0
From: Mass
Car: 1989 IROC-Z 100% Original
Engine: 5.0 TPI
Transmission: T-5
Axle/Gears: 3.08
RH Knuckle Part # 14021196
I will pay top dollar for a NOS "New Old Stock" Right Hand passenger side Knuckle Part # 14021196. I will also consider a used knuckle if its in excellent condition with low miles
Re: RH Knuckle Part # 14021196
Hello --
Here's a batch of knuckles in Indiana. New or lightly used spares from a Tommy Morrison Camaro racing program in '88 and '89.
Don't have a part number, but could send you close-up pix to assure this is what you need.
Here's a batch of knuckles in Indiana. New or lightly used spares from a Tommy Morrison Camaro racing program in '88 and '89.
Don't have a part number, but could send you close-up pix to assure this is what you need.
Thread Starter
Member
Joined: Jun 2005
Posts: 133
Likes: 0
From: Mass
Car: 1989 IROC-Z 100% Original
Engine: 5.0 TPI
Transmission: T-5
Axle/Gears: 3.08
Re: RH Knuckle Part # 14021196
There's actually Two different types of Knuckles.
All Street version Camaros from 82-92 had the same exact Knuckles, except Racing Camaro's with the 1LE Front Brakes had different size spindles so the front rotors and PBR calipers would fit. I need to know if these were used for Camaro's with 1LE or regular front brakes. If they came from a racing program then they might be the 1LE Knuckles so they would not fit on my camaro since I don't have the 1LE race option.
Send me some close up photos.. and try to get a part number off of theme if you can so we can be sure 100% of what you got there.
If they were used for Camaro's with the regular front brakes then I'd be totally interested in a New RH one if you have it.
Thanks
All Street version Camaros from 82-92 had the same exact Knuckles, except Racing Camaro's with the 1LE Front Brakes had different size spindles so the front rotors and PBR calipers would fit. I need to know if these were used for Camaro's with 1LE or regular front brakes. If they came from a racing program then they might be the 1LE Knuckles so they would not fit on my camaro since I don't have the 1LE race option.
Send me some close up photos.. and try to get a part number off of theme if you can so we can be sure 100% of what you got there.
If they were used for Camaro's with the regular front brakes then I'd be totally interested in a New RH one if you have it.
Thanks
Last edited by TrueIroc; Dec 19, 2012 at 12:03 AM.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: RH Knuckle Part # 14021196
Found a pic of the 1LE type spindle from BrettD. The bracket and caliper carrier is in place.
Just for general info: The later spindles, late 89 or 90+, apparently have a bit more material around the mounting holes.
JamesC
Last edited by JamesC; Dec 19, 2012 at 06:58 AM. Reason: Clarification/Additional Info
Thread Starter
Member
Joined: Jun 2005
Posts: 133
Likes: 0
From: Mass
Car: 1989 IROC-Z 100% Original
Engine: 5.0 TPI
Transmission: T-5
Axle/Gears: 3.08
Re: RH Knuckle Part # 14021196
The spindles pictured above are all standard pieces, 82-92. The 1LE version is simply the standard version with the ears cut off to accommodate a mounting bracket for the dual piston caliper.
Just for general info: The later spindles, late 89 or 90+, apparently have a bit more material around the mounting holes.
JamesC
Just for general info: The later spindles, late 89 or 90+, apparently have a bit more material around the mounting holes.
JamesC
Thread Starter
Member
Joined: Jun 2005
Posts: 133
Likes: 0
From: Mass
Car: 1989 IROC-Z 100% Original
Engine: 5.0 TPI
Transmission: T-5
Axle/Gears: 3.08
Re: RH Knuckle Part # 14021196
Ok Indianavette. JamesC cleared it up for us. I'm definately interested in a New Right Side/Passenger Knuckle . Are you selling them in pairs or individually? And Price??
Last edited by TrueIroc; Dec 20, 2012 at 03:57 AM.
Trending Topics
Re: RH Knuckle Part # 14021196
Sure, I'll sell you a right side knuckle. But can't say for sure it's brand-new. I can say the knuckles I have show little or no wear. Morrison was constantly swapping suspension pieces as part of his test and race programs. He refers to these as spares. They're all OEM. Asking $55 shipped. My Paypal account is indianavette@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
Thomas
Interior Parts for Sale
12
Oct 3, 2015 05:34 PM







