[AB] WTB: V8 TPI Engine Wiring Harness
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 14
Likes: 0
WTB: V8 TPI Engine Wiring Harness
I have a 91 Camaro and I am missing the C100 side of the Engine bay harness.
The car is a V8 5 Spd with A/C.
EDIT: It is a TPI not TBI, just found out.
The car is a V8 5 Spd with A/C.
EDIT: It is a TPI not TBI, just found out.
Last edited by consequence; Sep 20, 2013 at 01:59 PM.
Joined: Aug 1999
Posts: 5,261
Likes: 461
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: WTB: V8 TBI Engine Wiring Harness
I've got a TBI harness from a 91 ir 92 TBI Stick; $125 + shipping
It's pretty dirty and I found a couple wires spliced on it...... first was a splice @ the starter wire and the second is wires for the fan,... it's also missing a single plug - for the temp sensor on pass side head. ( can be bought from advanced auto ) The Ground wires at the back of the block are still intact and I didn't notice anything else that was modified from original.
If your still interested just send me a PM with your ZIP code and I'll reply with the remaining details.
It's pretty dirty and I found a couple wires spliced on it...... first was a splice @ the starter wire and the second is wires for the fan,... it's also missing a single plug - for the temp sensor on pass side head. ( can be bought from advanced auto ) The Ground wires at the back of the block are still intact and I didn't notice anything else that was modified from original.
If your still interested just send me a PM with your ZIP code and I'll reply with the remaining details.
Last edited by John in RI; Sep 20, 2013 at 11:58 AM. Reason: removed pics
Thread
Thread Starter
Forum
Replies
Last Post