[CA] 90-91 V-8 TPI Memcal
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 69
Likes: 0
Car: 5500lb Brick
Engine: Gen 1 SBC 383 Hyd Roller cam
Transmission: TH 400
Axle/Gears: 4.10 35in tires
90-91 V-8 TPI Memcal
Need V-8 $8D memcal for 1227730 /1227727 ecu preferably with netres/knockboard to most closely support 383 ie OEM 5.7l with auto trans OEM BCC ie, AXCS, ANHT, AUJP ,ANJF,
not sure if the manual trans BINS will have same Netres or not would like to have LHM if possible. Also open to suggestions from DIY Prom guys.
not sure if the manual trans BINS will have same Netres or not would like to have LHM if possible. Also open to suggestions from DIY Prom guys.
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 69
Likes: 0
Car: 5500lb Brick
Engine: Gen 1 SBC 383 Hyd Roller cam
Transmission: TH 400
Axle/Gears: 4.10 35in tires
Re: 90-91 V-8 TPI Memcal
I'm looking for one out of a 350 TPI so, if ever needed, LHM (LIMP HOME MODE)
will work,and the 350 Knock board will work with the 350 knock sensor.
Thanks for the reply!
will work,and the 350 Knock board will work with the 350 knock sensor.
Thanks for the reply!
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 69
Likes: 0
Car: 5500lb Brick
Engine: Gen 1 SBC 383 Hyd Roller cam
Transmission: TH 400
Axle/Gears: 4.10 35in tires
Re: 90-91 V-8 TPI Memcal
Thanks, I bought a couple already. I'm sure more members have been the victim of the v-6
memcal swap and will be needing your help. I don't want to hoard and make it more difficult for the next guy to find one.
memcal swap and will be needing your help. I don't want to hoard and make it more difficult for the next guy to find one.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post





