I'm doing an AUTO to LS/T56 swap into my 92 Camaro. I need the following:

LS t56 - (prefer that it needs to be rebuilt, but will consider all avaliable)

82-92 Camaro T56 Transmission mount / w. or w/out Torque arm relocation

Temp, fuel, MPH, oil, volt. Prefer autometer gauges, I have a tach.

Rear disc brake setup from 4th gen camaro - I currently have drum and would like to upgrade.

Fuel pump - walbro 255 or higher, prefer new.

LS Fbody Oil Pan

98-02 camaro stock LS exhaust manifolds

LS1 aftermarket fuel rails.

PAYPAL READY! (prices have to be decent.. 10-20$ under NEW price, for a beat up piece is not decent..)

Shoot me a message with a pic!

Located in south FL! Thanks!

 

i have a tubular k member from bmr

 

I just rebuilt my entire front end about 2 years ago, I don't think I need that piece at the moment. I appreciate it though!

 

Complete 5.3 here $700 + freight or pick up

Can do a package deal for the engine, LS1 intake, accessories and swap harness. Youd need and oil pan, injectors and exhaust to complete the engine

 

Where are you located? How many miles on the 5.3? Is it an Lm7? Shoot me a pic if you can.

 

Trinity, NC
140k give or take, yes iron block LM7

 

I appreciate it, but i found a local 5.3 with a lot of what i needed! for $700 with a new cam!

I also found the tunnel boot for the t56.

Now i'm trying to concentrate on the fuel system & wiring.

I NEED A DECENT FUEL PRESSURE REGULATOR. Just picked up an aeromotive fuel pump.

 

So I picked up the 5.3 yesterday. Bottom end has 60k, had heads done, ls6 cam, ls1 intake, truck intake all accessories except the wiring harness for $725. BUT I did pick one off ebay for $85 shipped.

 

I have a master and slave and throw out bearing from a ls1 t56 setup and truck manifolds lmk

 

Could you shoot me a couple pics? I was looking to get a new slave master setup, but if its in good shape id be interested.

How much for each or as a package deal?

 

I have a T56 crossmember and torque arm for sale
https://www.thirdgen.org/forums/engi...ossmember.html

I also think I have another set of Spohn LS engine mounts that I got with something else I can include for $40. I think they were in a car for mockup only.

I also have a set of truck manifolds or f-body manifolds from a 200 Camaro with cats, if you're interested

 

I'm gonna wait on the torque arm, but i would be interested in just the crossmember. It's for 82-92 camaro correct?

I already have motor mounts and the truck manifolds won't work from what i researched..

 

The crossmember is the mount for the torque arm, so it has to go together.

I have car manifolds too.

 

Sorry, I just saw your response.. you have car manifolds?

 

Yes, I have car manifolds with cats on them. Aftermarket cats, came out of a 2002 Camaro I think. I have an ad, with pictures I think if you search in the LTX classifieds under my name