I removed the complete TPI 5.0 from my 89 Formula last week and I sold it with the harness. I identified most of the items on the harness but I have a few questions before the buyer picks up the engine and harness.

1. How do I get the wiper motor harness seperated from the engine harness?

2. What is the black module with the 4 wire connection that is on a bracket on the firewall with the Fuel Pump, MAF, and Burn off Relays?
the wires are
-Pink w/black stripe
-black
-brown
-white

3. Is there anything on the engine harness that I need to keep before I get rid of it? I am not going to be running the AC or cruise control but I am going to retain the emmissions items.

Thanks for the help

 

Is the wiper motor as simple as tracing the wires in the harness?
Can I make my own wiper harness?
If so, do I need any relays?

 

The relay is for the Rad Fan.


To seperate the wiper relay from the engine harness you will have to untape and unwrap everything !