LT1 swap : Power steering pump only has one Line ?? How do I hook up ??
Thread Starter
Junior Member
Joined: Jul 2002
Posts: 12
Likes: 0
From: Florence, KY
Car: 1995 Camaro Z28
Engine: 400+ HP LT-1
Transmission: 4L60E
LT1 swap : Power steering pump only has one Line ?? How do I hook up ??
The engine and all accessories is from a 1994 Caprice. I've got one line coming from the pump, another going to the reservoir.
The car is a 88 V-6 and the power steering has 2 hook ups, one i'm sure for inlet, the other for low pressure return.
How Do I hook up the LT-1 pump up to this ??
-Shannon
The car is a 88 V-6 and the power steering has 2 hook ups, one i'm sure for inlet, the other for low pressure return.
How Do I hook up the LT-1 pump up to this ??
-Shannon
The power steering hydraulic system should be setup like this:
The remote resevoir should have a large feed hose going to the pump. The pressure line should go from the pump to the steering box. And the return line should go from the steering box back to the remote resevoir, not the pump. With the older style (like your V6), the return would go back to the pump only because the resevoir was integral with the pump.
The remote resevoir should have a large feed hose going to the pump. The pressure line should go from the pump to the steering box. And the return line should go from the steering box back to the remote resevoir, not the pump. With the older style (like your V6), the return would go back to the pump only because the resevoir was integral with the pump.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
