200 bucks, what would i need to convert my car from FI to carb, and what new would i need to get this engine working

------------------
Trent
---Car---
89 Firebird/305 L03 TBI A4/t-tops
Open Element Edelbrock Aircleaner w/ K&N air filter/Summit Chrome Valve Covers
Edelbrock TES headers 3" out/flowmaster American thunder 3" exaust/Catco cat
---Stero---
Pioneer DEH-P730 Premium
Infinity 2way 4652 4x6's/Pioneer 4way ts-a6985 6x9's
profile cl640 110x4

 

i am doing the same swap right now, a 89 V6 bird to a trans am clone with a 406 in it. email me and we can talk about it. lets see, gfx, rearend, transmission, headers, engine work, intake, carb, all sorts of stuff. theres alot to it. hope this helps. lil jay

------------------
Wide Open Till You See *** ...Then Brake

89 T/A Clone
406 in progress
TH700R4 3.42 Posi

 

Summit has a book, "How to Run 11 Second E.T.'s On a Budget" that has lots of info about running a 406 in a 3rd gen. The actual engine buildups are a little outdated, but it still has other good info about tranny, rearend, fuel system, and other modifications to your car you'll have to make. I was originally going to build a 406, but after pricing it out I realized I couldn't afford it, so I ended up getting a crate 350. I hope this helps. Good luck.

 

yeah 400s are nice, I have two virgin blocks.