Water hose Upper *Need help :(*
Thread Starter
Member
Joined: Feb 2011
Posts: 246
Likes: 9
Water hose Upper *Need help :(*
Hi everybody, here's my engine :
The problem is : I cannot fin a damn hose that fit into the engine and the rad...
I will use stock rad but the hose is not the right form and the end of the ose that plug into the engine is not enought big....
Some one already had problem like that??
The problem is : I cannot fin a damn hose that fit into the engine and the rad...
I will use stock rad but the hose is not the right form and the end of the ose that plug into the engine is not enought big....
Some one already had problem like that??
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Replacement '82-'87 carb'd V8 is all I've heard of people using.
Supreme Member
iTrader: (3)
Joined: Jun 2007
Posts: 2,359
Likes: 5
From: Pennsylvania
Car: 1992 Camaro RS
Engine: Rebuilt 350 going in after paint
Transmission: WCT5, 7k & counting behind the 350
Axle/Gears: 4thgen disc rear w/ 3.73 Posi
Re: Water hose Upper *Need help :(*
I used a carb hose with my engine swap like five7kid mentioned. If that wont fit, you can get flexible hoses that you can bend to whatever shape you need. They have a flexible metal coil inside them to hold the shape. They come in different lengths and end diameters. You should be able to find one that fits.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
