What do you guys think of my new motor?
Thread Starter
Member
Joined: Jul 2001
Posts: 151
Likes: 0
From: walla walla, wa
Car: 1990 Eagle Talon TSi AWD
Engine: 4G63T
Transmission: 5 speed
What do you guys think of my new motor?
4 bolt 350 bored .030 over balanced and blueprinted
202 casting heads with 202/160 valves and a pretty generous porting job
1.6 ratio roller rockers
rpm airgap intake with holley 750 DP
speedpro coated skirt pistons 11.0 CR
Corrillo I beam rods
Balanced forged steel crankshaft
custom grind cam 290' ADV dur 224' dur at .050 .465 lift 107-117 centers
moroso oil pan
moroso hi-vol oil pimp with 3/4 inch pickup
full roller timing chain
1 3/4 long tube headers
all running through a viper t-56 gearbox to 410 gears
it's going in next weekend. lemme know what you guys think. I'm hoping for maybe high 12's.
202 casting heads with 202/160 valves and a pretty generous porting job
1.6 ratio roller rockers
rpm airgap intake with holley 750 DP
speedpro coated skirt pistons 11.0 CR
Corrillo I beam rods
Balanced forged steel crankshaft
custom grind cam 290' ADV dur 224' dur at .050 .465 lift 107-117 centers
moroso oil pan
moroso hi-vol oil pimp with 3/4 inch pickup
full roller timing chain
1 3/4 long tube headers
all running through a viper t-56 gearbox to 410 gears
it's going in next weekend. lemme know what you guys think. I'm hoping for maybe high 12's.
Last edited by Purple Monkey; Feb 20, 2002 at 04:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM