I called jegs and these headers don't come with a y-pipe, so where else would i be able to get one? thanks

------------------
Mods:Hooker Aerochamber 3" exhaust, gutted kitty,
March 2 piece underdrive pullies, smog pump gone,;these two made a very noticable difference.
14x4 K&N open air element filter-the best mod so far
Eibach springs with KYB's all around.
Appearance: Harwood cowl hood, Z-28 wing, painted black(7/20/00)-original color was light blue
*All these mods were made this year
Stock Options:117,000 miles on motor, 5spd, TBI, 305, T-tops
Run a best of 16.7 @85mph with traction problem. Have to try again sometime.

 

Go to the Hooker(read as Holley)web site. You should be able to find what you're after. Once you have the part number you can call around for pricing.

 

I went there, and they have nothing about the y-pipe.

 

i had to have one made due to the same problem - i just bought the reducers and to them to my local muffler shop and they made a full 3 inch y pipe for 175$

 

There is none. I have those same headers.

 

thanks guys, i think i'll buy the edelbrock headers that have the y pipe already included.

------------------
Mods:Hooker Aerochamber 3" exhaust, gutted kitty,
March 2 piece underdrive pullies, smog pump gone,;these two made a very noticable difference.
14x4 K&N open air element filter-the best mod so far
Eibach springs with KYB's all around.
Appearance: Harwood cowl hood, Z-28 wing, painted black(7/20/00)-original color was light blue
*All these mods were made this year
Stock Options:117,000 miles on motor, 5spd, TBI, 305, T-tops
Run a best of 16.7 @85mph with traction problem. Have to try again sometime.