i have a 86 camaro,and am bolting in a 350 with hooker shorty comp headers.is there enough room to run 3"duals all the way back with two 40 series flowmasters(or simular) somewhere?
mike

------------------
86 camaro:was a v6 car,now its going to be a v-8 5.7l!!
350:cylinders bored .040 over.a little over 9:1 compression(getting a blower some day when im rich lol)line bored.deck is milled a little(was pitted)
trw forged pistons with summit stage 2 polished rods with arp bolts.
194? intake valves(not 2.02( ),pocket ported,gasket matched,and polished ports,torker2 intake with new zinc 650 holley
matched comp cam...runs great on pump gas!!

ase certified for a few years,learned alot though

working on freakin NEONS ,cirruses,tauruses,cobras(well` at least they look nice lol)and intrepids all day makes me drink too much
good job security though

im always on the lookout for cheapv-8 t-5,s
and t-56 setups.they must be cheap.i dont care of they need rebuild,as long as they arent totally blown
also looking for a pair of iroc taillights,and a 145 speedo(cable driven)

 

comeon people i know someone has tried.let me know please before i pay $500 at the muffler shop only to find out they had to run a smaller pipe.

 

Search the archives you will find all the answers you need.

 

I have 3" duels on my Z
check out my page at:

http://darcom.home.texas.net/

------------------
388 SuperRam, DFI, Vortech R trim ,N.O.S.,alki injection,
Dart sportmansII heads,50 pound injectors, Headman full headers
duel 3' exhaust,and Flowmasters, Ford nine inch with 370's
Ronal rims with Nitto drad raidals.