Dynomax catback Kit hanger location?
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 966
Likes: 2
From: NE Ohio
Car: 83 Z28
Engine: 305 (LG4)
Transmission: THM700R4
Axle/Gears: 10 bolt, 3.23 non-LS
Dynomax catback Kit hanger location?
I have an 1983 Z28 and the replacement Dynomax catback Kit is
17493 (see summit link)
http://store.summitracing.com/defaul...rt=WLK%2D17493
The parts list for that kit is attached below. My question is does the hanger that I have highlighted in red in the attached picture connect to the passenger side tailpipe (where I have highlighted in red) or somewhere else?
thanks,
phil
17493 (see summit link)
http://store.summitracing.com/defaul...rt=WLK%2D17493
The parts list for that kit is attached below. My question is does the hanger that I have highlighted in red in the attached picture connect to the passenger side tailpipe (where I have highlighted in red) or somewhere else?
thanks,
phil
Supreme Member
Joined: Jul 1999
Posts: 1,593
Likes: 3
From: out of my mind; be back in 5 minutes....
Car: 1989 Firebird Formula
Engine: Internal Combustion
Transmission: Completed
Axle/Gears: ones that turn.
It should be on the driver side tailpipe, and mount to the 'frame rail'. The hanger on the I-pipe will support the passenger side.
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 966
Likes: 2
From: NE Ohio
Car: 83 Z28
Engine: 305 (LG4)
Transmission: THM700R4
Axle/Gears: 10 bolt, 3.23 non-LS
But according to the picture (summit racing link) the driver side pipe has a hanger welded on the actual tail pipe. So why would they call out a separate part # if it is welded to the pipe?
thanks.,
phil
thanks.,
phil
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 29, 2015 10:08 PM
