Exhaust Post your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!

SUPER 44'S!!!

Thread Tools
 
Search this Thread
 
Old Nov 2, 2009 | 10:22 PM
  #1  
iroc stangs's Avatar
Thread Starter
Supreme Member
 
Joined: Sep 2009
Posts: 1,319
Likes: 0
From: Tigard, OR
Car: 87 iroc-z camaro
Engine: 305TPI
Transmission: 700R4
Axle/Gears: G92 3.23 posi
SUPER 44'S!!!

hi well i need a new muffler ( not exhuast i have pretty much no money ) and iv been lisening to clips and iv decided i want super 44's after lisening 2 this 1 clip i think i came a lil lol.

but how much is this muffler?

where do it get 1?

will it just be a direct bolt on to a 87 iroc 305tpi/auto?

i really like this exhuast or the 40 series is still nice.

or should i just buy a replacment?

where do i buy a replacment?

should i buy used do to my money problem?

plz give me a link if you can to some1 that is selling this muffler or a replacement 1.

thx guys and how long do these take to install with a person that is experienced with third gens?

also will 1 of these mufflers still allow me to pass emmisions, sound testing and all that?

Last edited by iroc stangs; Nov 2, 2009 at 10:27 PM.
Reply
Old Nov 4, 2009 | 08:21 AM
  #2  
84 z28's Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: SUPER 44'S!!!

I am assuming you exhaust is stock so the super 44's are out of the question. With a stock exhaust you can only get a crossflow muffler. Here are your options :

http://www.summitracing.com/search/y...?Ns=Rank%7cAsc
Reply
Old Nov 4, 2009 | 09:30 AM
  #3  
Tpx's Avatar
Tpx
Senior Member
 
Joined: Jun 2008
Posts: 305
Likes: 1
From: Cypress, CA
Car: 1982+1988 Z28 Camaros
Engine: 1982=350 carb 1988=383 Carb
Transmission: 1982=4 speed T-10 1988=6 speed T56
Axle/Gears: 1982=stock
Re: SUPER 44'S!!!

Flowmaster super 44's? If that's the muffler you need, then they most certainly DO have it, but not in a transflow design. They have it with a single to single or a single to dual out on the opposite side. You need a out/in on one side and then single out on the other, they don't have that but that doesn't mean you can't use it. Here's a link to flowmaster's online website, there's three pages to look through I'm sure you will find a muffler for your size inlet/outlet if you're running stock exhaust. The only modification you'll have to accept is that either you'll have to change over to a single pipe after the muffler, or use a dual exit muffler and run a new pipe back over to the other side since initially both out ports are on the same side and you needed one on each side.

http://www.flowmastermufflers.com/sh...ath=34_218_224

Last edited by Tpx; Nov 4, 2009 at 09:57 AM.
Reply
Old Nov 4, 2009 | 09:51 AM
  #4  
84 z28's Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 1,801
Likes: 21
From: Rochester NY
Car: 1984 z28
Engine: 355
Transmission: 700r4
Axle/Gears: Moser 9" 4.11
Re: SUPER 44'S!!!

Originally Posted by Tpx
Flowmaster super 44's? If that's the muffler you need, then they most certainly DO have it. Here's a link to flowmaster's online website, there's three pages to look through I'm sure you will find a muffler for your size inlet/outlet if you're running stock exhaust.

http://www.flowmastermufflers.com/sh...ath=34_218_224
Like I said before that muffler wont work with a stock exhaust. Stock exhaust uses a crossflow muffler which the super 44 isnt.The only thing flowmaster offers is an 80 series crossflow and thats it.
Reply
Old Nov 4, 2009 | 12:02 PM
  #5  
Tpx's Avatar
Tpx
Senior Member
 
Joined: Jun 2008
Posts: 305
Likes: 1
From: Cypress, CA
Car: 1982+1988 Z28 Camaros
Engine: 1982=350 carb 1988=383 Carb
Transmission: 1982=4 speed T-10 1988=6 speed T56
Axle/Gears: 1982=stock
Re: SUPER 44'S!!!

I edited my post, reread it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
Jan 9, 2016 09:22 PM
AmpleUnicorn88
South West Region
8
Dec 11, 2015 11:53 PM
Zell1luk
TPI
0
Sep 29, 2015 10:36 AM
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 25, 2015 03:51 PM




All times are GMT -5. The time now is 02:12 AM.