Spohn Slp Group Purchase!
30001 is for single cat
30003 is for dual cats
If you go on www.slponline.com, all the info is there.
30003 is for dual cats
If you go on www.slponline.com, all the info is there.
Supreme Member

Joined: Sep 2001
Posts: 1,195
Likes: 0
From: Flowery Branch, GA
Car: 1985 Iroc-Z
Engine: 1 BA 305 TPI
Transmission: Probuilt 700R4 - 2800 Stall Midwest
Axle/Gears: 3.42
It includes the y-pipe but it does not include the install kit. You can get the install kit for $89.95 at thunderracing.com. The cat adapter is $29.95.
I think i want the 30001C, that air crap is for emission stuff or whatever? i'm assuming thats what i need. IF that is the correct part number, i'll let you know if i'm in or not tonight after i get off work. Thanx
Member
Joined: Jan 2001
Posts: 448
Likes: 0
From: Bakersfield,ca,us
Car: 91 z82
Engine: 5.0
Transmission: pro-built 700r4: 2400 stall
right
the "Air" is for the smog equip.
you can get it with or without air
but as long as you only have one cat.... and want air....and want them coated....... the 3001c is what you need
the "Air" is for the smog equip.
you can get it with or without air
but as long as you only have one cat.... and want air....and want them coated....... the 3001c is what you need
Supreme Member

Joined: Sep 2001
Posts: 1,195
Likes: 0
From: Flowery Branch, GA
Car: 1985 Iroc-Z
Engine: 1 BA 305 TPI
Transmission: Probuilt 700R4 - 2800 Stall Midwest
Axle/Gears: 3.42
91camaroRS, unless you plan on changing from the 305 to 350 you may want the 30000C. These are the ones with 1 5/8" primaries and w/air, which is what is recommended for that engine. The 30001c are 1 3/4" which are too big for that engine(according to SLP).
Member
Joined: Jan 2001
Posts: 448
Likes: 0
From: Bakersfield,ca,us
Car: 91 z82
Engine: 5.0
Transmission: pro-built 700r4: 2400 stall
It's really up to you 91
I went with the 1 3/4
I've heard both have good gains on 305 and 350
But ya you might want to think about it if your not going to ever swap the 305
I went with the 1 3/4
I've heard both have good gains on 305 and 350
But ya you might want to think about it if your not going to ever swap the 305
Supreme Member

Joined: Sep 2001
Posts: 1,195
Likes: 0
From: Flowery Branch, GA
Car: 1985 Iroc-Z
Engine: 1 BA 305 TPI
Transmission: Probuilt 700R4 - 2800 Stall Midwest
Axle/Gears: 3.42
Call Spohn and start placing orders. His number is somewhere earlier in this post or you can go to the website. Maybe if he checks these posts he can give us a little more info but I think he covered it in an earlier post.
Hey guys, just an FYI, I just got my new SLP pricing sheet for 2002 that was effective 01/15/02 and the prices went up on most of the headers. I have to call and ask them a few questions and then I will post the new prices. Some of them went up $50.00, no lie.
I sure hope they still gave me the old pricing on the last GP order or I lost my ***.
Steve
I sure hope they still gave me the old pricing on the last GP order or I lost my ***.
Steve
Supreme Member

Joined: Sep 2001
Posts: 1,195
Likes: 0
From: Flowery Branch, GA
Car: 1985 Iroc-Z
Engine: 1 BA 305 TPI
Transmission: Probuilt 700R4 - 2800 Stall Midwest
Axle/Gears: 3.42
That sucks.... I may have to drop out of this one for now. I hope there will be another one a about a month or so.
What I need to find out about is the shipping. According to this new sheet if you order 6+ to get the best pricing, they will not drop ship anymore at that price level, they have to be truck shipped to me and then I have to ship them to you.
They apparently went to a flat rate per item shipping schedule. I ordered some parts I needed for some installs on 4gen cars here, and one box of parts they charged me $80.00 shipping, I'm one state away in PA, they're in NJ.
Yeah, I left several messages, no call back yet. If that's the case, I don't know how it will be feasible to do business with them. I'll keep you posted.
Steve
They apparently went to a flat rate per item shipping schedule. I ordered some parts I needed for some installs on 4gen cars here, and one box of parts they charged me $80.00 shipping, I'm one state away in PA, they're in NJ.
Yeah, I left several messages, no call back yet. If that's the case, I don't know how it will be feasible to do business with them. I'll keep you posted.
Steve
Originally posted by SteveSpohn
If that's the case, I don't know how it will be feasible to do business with them.
Steve
If that's the case, I don't know how it will be feasible to do business with them.
Steve
Supreme Member
Joined: Jul 1999
Posts: 1,431
Likes: 1
From: Huntsville, AL
Car: '00 Chevrolet Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
Got mine in today. I ordered the 30005c for anyone too lazy to go look back
. These things are beautiful
. Definately a good purchase.
. These things are beautiful
. Definately a good purchase. Sorry guys I called Steve a couple times last week and never got a reply, so I just ordered mine the old fashioned way on friday.
They quoted me the same price as before 399.99+40 shipping.
Sorry with the warm weather I just could not wait.
Thanks anyway steve it was nice of you to do this GP.
They quoted me the same price as before 399.99+40 shipping.
Sorry with the warm weather I just could not wait.
Thanks anyway steve it was nice of you to do this GP.
Sorry, but I didn't know the exact new pricing until now.
New GP Pricing is listed below. 6 or more header orders are required for this pricing. If you want to place an order, go to this link:
http://www.spohn.net/index.cfm?fusea...t&productid=83
It is a misc. page. Just add a qty. of 1 to the shopping cart and then click on check out. That will give you the order information page. In the comments box just put:
"SLP Header GP 02 - Part Number"
Email me with any questions to sales@spohn.net
Thanks.
Non-Coated:
30000 $415.00
30002 $415.00
30004 $385.00
30016 $345.00
30001 $415.00
30003 $415.00
30005 $385.00
30014 $385.00
Headers Available Coated:
30000C $595.00
30001C $595.00
30005C $515.00
Installation Kits:
30018: $99.95 - $89.95
30022: $69.95 - $63.95
30024: $59.95 - $53.95
30028: $32.95 - $29.50
On installation kits and cat adapters above, first price is if 2-5 people order a kit, the second price is if 6+ people order a kit.
Shipping:
If my total with SLP is less than $2500.00, they will be drop shipped from SLP to you. Headers are $40.00 shipping. Installation kits are $8.95 to $11.95 depending on which kit you order. The higher priced kits are $11.95 and so on.
If my total order with SLP is more then $2500.00, everything will ship direct to me via truck freight which is included in my price, no additional charge. I will then ship them to you via FedEx Ground and you will be charged the actual FedEx Ground charge, which I'm sure will be less than $40.00 for headers
Thanks,
Steve
New GP Pricing is listed below. 6 or more header orders are required for this pricing. If you want to place an order, go to this link:
http://www.spohn.net/index.cfm?fusea...t&productid=83
It is a misc. page. Just add a qty. of 1 to the shopping cart and then click on check out. That will give you the order information page. In the comments box just put:
"SLP Header GP 02 - Part Number"
Email me with any questions to sales@spohn.net
Thanks.
Non-Coated:
30000 $415.00
30002 $415.00
30004 $385.00
30016 $345.00
30001 $415.00
30003 $415.00
30005 $385.00
30014 $385.00
Headers Available Coated:
30000C $595.00
30001C $595.00
30005C $515.00
Installation Kits:
30018: $99.95 - $89.95
30022: $69.95 - $63.95
30024: $59.95 - $53.95
30028: $32.95 - $29.50
On installation kits and cat adapters above, first price is if 2-5 people order a kit, the second price is if 6+ people order a kit.
Shipping:
If my total with SLP is less than $2500.00, they will be drop shipped from SLP to you. Headers are $40.00 shipping. Installation kits are $8.95 to $11.95 depending on which kit you order. The higher priced kits are $11.95 and so on.
If my total order with SLP is more then $2500.00, everything will ship direct to me via truck freight which is included in my price, no additional charge. I will then ship them to you via FedEx Ground and you will be charged the actual FedEx Ground charge, which I'm sure will be less than $40.00 for headers

Thanks,
Steve
Last edited by Dirk; Jan 28, 2002 at 02:26 PM.
Holy Moly!!! In the first GP, 30001C went for $475, now they are $595?!?!? $60 more, and they are mine straight from SLP.
Steve, I know you have no control over this.
I am starting to think SLP is the devil.
Steve, I know you have no control over this.
I am starting to think SLP is the devil.
Supreme Member
Joined: Jan 2001
Posts: 1,411
Likes: 3
From: Rock Hill, SC
Car: 1999 Pontiac T/A Firehawk
Engine: ***'s Engine
Transmission: T56
Ah, quit whining. You ever see how much LS1 headers cost???
I'm still trying to decide if I want to get in on this now or wait a little bit...
I'm still trying to decide if I want to get in on this now or wait a little bit...
Steve. Im going to open another thread for installation kits so we don't jumble this one up any more and we will know when we get more then 6 people.. if ya dont' mind..
OH and one important question.. is that 6 people PER that specific kit?? or 6 people total for all kits?? And one more question.. i noticed that #30028 is for the LG4 305..... wut about the other cat adapters??
OH and one important question.. is that 6 people PER that specific kit?? or 6 people total for all kits?? And one more question.. i noticed that #30028 is for the LG4 305..... wut about the other cat adapters??
Last edited by breathment; Jan 29, 2002 at 10:53 PM.
Supreme Member

Joined: Sep 2001
Posts: 1,195
Likes: 0
From: Flowery Branch, GA
Car: 1985 Iroc-Z
Engine: 1 BA 305 TPI
Transmission: Probuilt 700R4 - 2800 Stall Midwest
Axle/Gears: 3.42
Here is an updated list of people that on the GP. If your name is on the list an should not be. Leave a post.
1) jfreeman74 30001C
2) Arron-82TA 30005C
3) Omar 30001C
4) TorchTA 30000C
5) Toosloz 30005C
6)
1) jfreeman74 30001C
2) Arron-82TA 30005C
3) Omar 30001C
4) TorchTA 30000C
5) Toosloz 30005C
6)
Last edited by jfreeman74; Jan 30, 2002 at 05:49 AM.



