I have manual ones for sure and I might have a power one somewhere, please PM me. Thanks!

 

How's it going im looking for some small interior pieces in Grey with no scratches or fading on the parts - this applies to all.

I need the rear lift support Torx Screw cover (grey Circle cap on the lift support shock)

I need both guide plates with 4 original screws

I need nice condition seat belt receivers ( no Bowing/disformation or torn)

The Grey Interior Screws that go in the back plastics.

I would also like the T-Top shade cover and rear sail panels if in tact and in great shape.

If you have the lighting mechanism in the rear hatch cargo area as well i will take that, not the lense but the unit itself. Also could use some of those screws and the passenger side rear plastic.

If you have these please feel free to PM me and i will give you all details necessary for purchase. If you could provide pictures to my phone or email after PM that would help speed things up and i hope to grab everything as a whole to save on shipping.

Thanks for your time!

 

Sorry I didn't have time to read, but do you have a passenger side seat belt? with the gray interior?

 

I'm looking for a pair of rear hatch hinges with the bolts and nuts...Do you have a set that are in good condition? Price shipped to 61821? Thanks.

 

I should have a good belt but no reciever. PM me please.

 

Just picked up a bunch of interior parts! (mostly red/ burgundy stuff) Lots of other 50's to 70's GM parts too!

 

bump!

 

need the moldings that are on the hardtop car that go along the roof and down the windshield pillar ...i see from the pic there on the hardtop car ..

 

The stuff that the weatherstripping clips on to? Shoot me an email, wwe442@aim.com then I can get back to you faster from my phone. Thanks!

 

Looking for a drivers side manual window regulator. Any luck?

 

Yep I have a few of them, please email me wwe442@aim.com for a faster response or just PM me. I can get email on my phone but not the site so it makes my life 10x easier lol

 

Just picked up a 91 Camaro parts car. No ground effects, car is pretty much stripped but theres still some odds and ends things.

 

Still looking If you got any send me pictures, u should have my email already. Looking for the fender and gfx

 

I have to check on ground effects but I do have 2 fenders. What was your email again? Thanks

 

DO you have any spare tires that are in good shape

 

Yes, I have some that appear to never have been used and some that are on cars as rollers right now. Please email me wwe442@aim.com and I can send you pics. Thanks

 

bump

 

I am in need of an 84 delay wiper motor cover.

 

The plastic cover that goes over the wiper motor?

 

Yes, the plastic cover with the circuit board inside for delay/intermittent wipers. I thought 84 to 87 were the same, but now I'm not sure.

 

looking for a front bumper cover for 84 z28 any chance you got one and how much?

 

I'll double check today to see if the 84 has one, I'm not sure if it fits up to 87 because I thought someone said once that 84 had a different one.

 

Yes I do, please pm me.

 

84 is the one I need. Thanks for looking.

 

The one on the 84 z28 is broken, the one on the 87 is intact. I'm not sure on the interchangeablility but they look similar so they may interchange. Thanks!

 

Just got a rear set of black LEATHER seats from an 02 Firebird!

 

How much for a IROC/Z28 front bumper w/ splitter and a rear bumper w/ ground effects?

 

I don't have any front bumpers at this time but a rear is $125 for the cover. Thanks!

 

By any chance do you have a Camaro grille, with white lettering?

 

I'll have to double check for you if I have a used one, I might be able to get you a new GM one if they didn't discontinue them on me yet. Let me know which you prefer. Thanks!

 

I was able to find one, Thanks though! If i need anything else I'll be sure to ask again.

 

No problem, thanks for letting me know!

 

I need a passenger side fender off of the blue 86 or the silver 84? Do you have either one?

 

hi, I need a green turn signal lens from a gauge cluster. what's that gonna cost me?

thanks, greg

 

Just the little bingo chip sized piece? Thanks!

 

Yes, please PM me. I have GM and aftermarket. Thanks!

 

What part of the country are you in?

 

yes sir. there are 2 in each camaro gauge cluster.

thanks, Greg

 

I do have a cluster that I can tear apart for them, pm me please. Thanks!

 

Pennsylvania

 

I am in need of the locking mechanism for the rear hatch for an '85 Camaro (non-electric pulldown). I know the lock cylinder is missing on the car I just purchased, so I am not sure how much is exactly missing. Would prefer to buy the latch/lock/key setup if possible. I would even take the door locks so they match if possible. Shipping would be to 04254.

Thanks,

Ken

 

I'll double check but I think all mine have the electric motor. The 84 is the only one I'm not 100% sure of but I'll check it out for you. Thanks!

 

Sorry for the delay, the 84 does have the manual motor on it. I can round up some locks for you as well if you are still interested. Thanks!

 

Hit me up with a price for the assembly with linkage and lock, and a price for just the linkage and lock. I think that is all I actually need. Shipping would be to 04254.

Thanks, Ken

 

Just curious about these:

Hardtop headliner in black (preferably cut for overhead console but no big deal)

Red GTA door panels and armrests (don't need the brackets)...

Need these:

That clip that holds the driver's side remote mirror stick in the trim piece

Antenna base nut for non-power antenna

Black hatch strut body bolt covers (the round caps and the clips on the other side, where the struts mount to the body)

Any 4th gen parts (preferably 93-96 Camaro) or 91-92 Birds?

Where in PA are you located?

 

was wondering if any of those cars have good floor pans that you are willing to cut out, if so how much shipped to 76544

 

have stock wheels for firebird? if so how much for all 4?

 

PM sent

 

I suppose I can cut some out, PM me please. Thanks!

 

Steels or aluminums?