Fabrication Custom fabrication ideas and concepts ranging from body kits, interior work, driveline tech, and much more.

ok, check it out so far

Thread Tools
 
Search this Thread
 
Old Dec 6, 2008 | 02:30 AM
  #1  
82camaroWI's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 40
Likes: 0
From: janesville, wisconsin
ok, check it out so far

before
















P
Reply
Old Dec 6, 2008 | 02:31 AM
  #2  
82camaroWI's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 40
Likes: 0
From: janesville, wisconsin
Re: ok, check it out so far




after








Reply
Old Dec 6, 2008 | 02:31 AM
  #3  
82camaroWI's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 40
Likes: 0
From: janesville, wisconsin
Re: ok, check it out so far






so i had my driver side refabracted, passenger side refabed, firewall refabed, that rust spot refabed. (gonna be putting some bondo on it and priming it for the winter) had seat bracets put in and a two new seats, new dash, headliner, window, also my control support arm was refabed, and i got a new exhust from the Y pipe back with dual exhust (not a true dual, just two tail pipes). all this with the dash mat and custom fitted carpet was around 1300 dollars and thats with 200 for the windshield and 100 for the carpet 40 for the mat, so everything else was 950 bucks :
Reply
Old Dec 6, 2008 | 10:49 AM
  #4  
jccaclimber's Avatar
Senior Member
 
Joined: Apr 2007
Posts: 261
Likes: 0
From: Terre Haute, IN
Car: 1991 RS Camaro
Engine: 350 0.060" over
Transmission: 700r4
Re: ok, check it out so far

That looks much nicer.
Reply
Old Dec 7, 2008 | 12:32 AM
  #5  
Tmic87TPI's Avatar
Supreme Member
iTrader: (3)
 
Joined: Dec 2006
Posts: 1,116
Likes: 1
From: Guilford, Connecticut
Car: 1987 Trans Am
Engine: 355
Transmission: t56
Axle/Gears: 3.73
Re: ok, check it out so far

sorry man but that patch in the 1/4 panel looks like s***, the body line goes way up at the wheel. I'd definitely re-do that patch... but everything else looks great. it was a complete rot box before so its on its way for sure!
Reply
Old Dec 7, 2008 | 12:35 AM
  #6  
82camaroWI's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 40
Likes: 0
From: janesville, wisconsin
Re: ok, check it out so far

yah that got that rust in about 5 days in wi weather, i am gonna be sanding it, bondo, and priming it for the winter. gonna redo my paint next spring so if i redo it, it will be then
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bubbajones_ya
Cooling
24
Jul 6, 2024 08:32 PM
BumpaD82
Tech / General Engine
37
Feb 26, 2016 02:57 PM
skeltor
DFI and ECM
17
Feb 2, 2016 10:37 AM
Numbah-1
Transmissions and Drivetrain
19
Sep 12, 2015 08:57 PM




All times are GMT -5. The time now is 06:39 PM.