buildsheet on top of fuel tank on third gens ?

Subscribe
Mar 12, 2004 | 08:19 AM
  #1  
anyone ever found a buildsheet on top sid eof fuel tank on a third gen F body ? i found one on the top side of the gas tank a 74 ventura i just scrapped recently.

hmm.,.
\


thanks
Reply 0
Mar 12, 2004 | 08:25 AM
  #2  
I have heard of them under the carpet above where the gas tank bump is, usually there under the carpet in the front passenger compartment tho.

John
Reply 0
Mar 12, 2004 | 09:05 AM
  #3  
i just finished gutting the interior and no buildsheet no where for sure now, damn

that sucks

oh well, at least i can see now what interior parts need repaired or replaced, and i can see that entire floor of car is nice shape cept a minor area of surfacr ruts on pass side front part of rear floor pan, easy fix with soem sanding or wire brushing and sealer


hmm..


thanks
Reply 0
Mar 13, 2004 | 04:48 PM
  #4  
This is where my build sheet was

Reply 0
Mar 14, 2004 | 10:49 AM
  #5  
Mine was in the spare tire well.
Reply 0
Mar 16, 2004 | 07:00 PM
  #6  
i wish i knew were mine was
Reply 0
Mar 17, 2004 | 01:10 AM
  #7  
Quote:
Originally posted by Aviator857
This is where my build sheet was

that was the first item i took out of the car besides the inside lower hatch panel cover


there just is no sheet in my 82 t/a. that stinks...

car wil never be anything special anyways, yes ill have the QP and fenders replaced and windshield too and get replacement interior stuff and repaint the car, but the drivetrain is far from correct or anytyhing that was factory available for 1982 and the rear axle isa about to be swapped from another third gen, so the car will never be an original restoreable car, but still will run and look great once i get everything together that i need,.

the way i see it i think that it is better for the car to be mostly non original and never to be restored and have its original drivetrain and be able to be enjoyed and driven and cruised- rather than be in a scrapyard right now
Reply 0
Mar 18, 2004 | 08:16 PM
  #8  
I have heard that the build sheets were inside the back seat? Not really sure but thats what ive heard....
Reply 0
Mar 18, 2004 | 11:13 PM
  #9  
not in mine, theres a zipepr deal along bottom of my seat back but it doesnt open it up

hmm

thanks
Reply 0
Mar 19, 2004 | 10:11 PM
  #10  
Quote:
Originally posted by Aviator857
This is where my build sheet was

Cool, I found that same thing underneath my driver side rear seat. It was even on top of the carpet. Guess I was the first person to ever remove that seat.
Reply 0
Mar 20, 2004 | 03:05 PM
  #11  
GM put the build sheets on top of the gas tank because when going into assembly that is one of the first pieces to be added to the car.
Reply 0
Mar 21, 2004 | 08:39 PM
  #12  
On my 89 formula it was behind the front bumper cover.. found mine when I was repainting it..its kind of messed up from being wet ...but it was there for 100,000 miles
Reply 0
Mar 22, 2004 | 11:02 AM
  #13  
I found my build sheet attached to the springs under the front drivers seat. Perfectly intact, what a find!
Reply 0
Subscribe