dash gauge help
Thread Starter
Junior Member
Joined: Mar 2008
Posts: 1
Likes: 0
dash gauge help
while changing the peanut bulbs in the dash cluster of my 86 bird my husband jared the cluster braking off two of the needles (dumb ***
). so we decided to go ahead and just replace the entire dash cluster with what ever we wanted well i wanted i decided to go with auto meter analog gauges and do it all the way i wanted it done (hey he broke it i get to be mean now) but when looking for gauges we found a problem that he caint solve (no surprise lol) on the fuel gauge in the original dash cluster what is the ohm ranges for empty and full reading sry if this post is in the wrong spot tha nks for your help guys
). so we decided to go ahead and just replace the entire dash cluster with what ever we wanted well i wanted i decided to go with auto meter analog gauges and do it all the way i wanted it done (hey he broke it i get to be mean now) but when looking for gauges we found a problem that he caint solve (no surprise lol) on the fuel gauge in the original dash cluster what is the ohm ranges for empty and full reading sry if this post is in the wrong spot tha nks for your help guys 
Member
Joined: Apr 2005
Posts: 329
Likes: 0
From: tasmania australia
Car: 1985 z28 camaro
Engine: 305 lg4,edelbrock,3"air cleaner.k&n
Transmission: turbo 700r4 w/b&m megashifter
Axle/Gears: Stock.
Re: dash gauge help
For that year,it should be 0 ohms for empty,and 90 ohms for full.If thats not correct,someone else can jump in ,but i think its right.
Alicat.
Alicat.
Thread
Thread Starter
Forum
Replies
Last Post